Using the machine the first time was fun - it has lights that shine down on the cup for a very cool look. It is much quieter than our DeLonghi, and very fast to heat up and grind, brew, and dispense the coffee. The crema is very nice, and the coffee tastes great. The drip tray is easy to pull out to the front, and easy to rinse and throw away the grinds. The machine is plastic, which is ok, but the tray where the cup rests is polished silver metal, and has a nice heaviness to it. The J9.3 comes with a Jura milk container and tubes. We don't do a lot of milk drinks, so I didn't mind that you have to do just a bit extra to fill up the container and attach the hose. You could just put a hose into a cup of milk; you don't have to use the Jura container. It made a very nice latte, great foam. It was actually easy to clean and rinse, but you do have to take the time to be there with two cups - one with rinse water and another to catch the dirty water, then repeat. If you don't mind taking a couple extra steps and minutes, then it's easy. The J9.3 came with the Jura milk container.
You get a full roster of customer support with the Capresso EC-100. If you run into problems, you can contact customer service using a toll-free phone line during business hours or by email. You can also check the Capresso Facebook page to learn more about your espresso maker. You get a one-year warranty with this espresso machine, which is typical for the espresso maker industry.
That’s a pity because as auto-frothers go, it’s a very good one. The one thing we’re not so crazy about is the fact that you’ve got to run plastic tubing from your milk source (you have to provide your own, by the way – you do not get one when you purchase the machine) to the frothing arm, which makes your very expensive coffee machine look like a high school science project.
The machine is very nice looking in person, very sleek. The instruction manual is pretty sparse on details. It has enough, but it's a little intimidating for a first time user. I took my time and found out that the programming is very user friendly and easy to use. I have ours on our counter with a cabinet overhead. When I fill water reservoir I do pull the machine a bit forward because the reservoir is deep and you have to lift it straight up. It's easy to do but you need a bit of clearance. The bean hopper is in the back, so I pull the machine forward a bit to fill that, as well. Very easy to do. One thing I wanted in the J9 was the option to use a water filter. I have hard water from our tap, and had been filling our DeLonghi from our filtered refrigerator dispenser, but that was cumbersome. With the Jura filter I can fill the deep reservoir right in the little bar sink I have next to the machine. I tested the water before and after, and the Jura filter definitely works to reduce hardness, which is important in keeping the machine free from mineral scale buildup. I think it will be well worth the expense of replacing the filters. It came with one filter and a couple of descaling tabs, which I have not had to use yet.
Some of the more popular mass market coffee machines are starting to look a little bit dated (not least the hugely popular and bestselling ESAM4200 by Delonghi), but that couldn’t be further from the truth with the Jura Impressa F8. It’s a very stylish and sophisticated looking machine, that wouldn’t look out of place in an upmarket cafe or bar. Jura have managed to pack a lot of controls in to the unit to give near unparalleled control over coffee making, yet retain a fairly minimalist look. There’s something about a black and silver finish that just looks the part, particularly on kitchen appliances that sit on the worktop – you don’t want something ugly to look at as a permanent fixture in the kitchen!
I'm coming up on a year with this machine in December. It can be a little picky about the beans (not oily). But with lavazza super crema beans, it performs quite well. I very seldom get a shot that I don't like. I vary my drinks day to day, and enjoy straight espresso, cortados, lattes, and occasionally coffee. It doesn't disappoint in either of the modes. I don't like that if I program my drink (2 shot espresso) and double tap the start button, it will simply pull double the volume, and not do a full 2 cycles of the double shot. There is a noticeable difference in the quality of the shots when I do this.
Jura elevates the bean to cup experience. Certain models, including the GIGA 5, Z9, J6, S9, E8 and ENA Micro 90 are equipped with One-Touch technology to brew the perfect cup cappuccino at the touch of a button. Newer models freature Jura's Pulse Extraction Process which improves the quality of your espresso. Several of the Swiss-made machines produce coffee and espresso to your exact specifications for strength, volume and temperature with flavor that is on par with the best cafes in the world—and it’s brewed with the touch of a button. Commercial Jura machines for the workplace are also available. With Jura machines ranging from $799 to $8,995, there is a model for every coffee lover. Call us today and let us help you find the perfect Jura coffee center for your needs.
With many of the Jura models available in our review guide, you will be able to control the unit with a large, stunning visual screen that is controlled by buttons on the side and a rotary dial on the top of the unit. With the buttons on the side of the screen, you select a class of coffee beverage such as espresso or plain coffee. After you decide your class of drink, you can literally turn the dial and watch the different drink selections go by until you find one that suits your mood. The interface is finely tuned and at no point does it feel cumbersome or stand in your way. The Jura is an extension of your coffee desires and the only thing standing between you and your perfect drink is the press of a button. For the models that don’t feature the visual display, there is an equally easy to use and ergonomically arranged display of buttons. The three green, yellow, and red lights, coupled with the rotary knob delivery your desired beverage just as quickly and with zero confusion as to how to select it.
Embodying the tradition and soul of over seven and a half decades of experienced in one super automatic espresso machine, the new Gaggia Anima is one of the top fully automatic espresso machines you can currently get. The incredible beauty of this model combines tradition and modernity in a distinctive and elegant design that can easily outlive trends and fads. When it comes to how easy it is to use it, the Anima features a digital display and designated drink buttons, meaning that no matter if you want to enjoy a cappuccino or espresso shot, you can easily program the machine to do it in seconds. Better yet, to suit your preferences, you can easily customize each drink option in order to get the perfect taste.
Any coffee-based beverage is only going to be as enjoyable as the beans that are used to make it. If you don’t already, you will need to source high-quality, whole coffee beans and drink enough coffee to make sure that those beans aren’t going stale. You can use any beans that you like, but small batch and single-origin coffee beans are going to make a world of difference over bulk and mass-produced coffee beans.
On the inside, the Anima features a ceramic burr grinder which can be easily configured to one of five grind settings in order to accommodate the blend and roast of your espresso. If you want, there’s also an option that allows you to use the bypass doser in order to brew pre ground coffee. For hassle free maintenance, the machine makes use of the company’s patented removable brew group. There are of course, other features you’re going to love about this model, including the digital display that alerts you when maintenance is required, pre-infusion, 60 oz water reservoir, Rapid Steam Technology, adjustable coffee dispenser and low energy consumption standby mode.
Better yet, you can also customize the volume, strength and also coffee aroma in order to ensure that you prepare the ideal drink you and your friends are going to love. Other than that, the grinder uses Gaggia’s Adapting System for adjusting the RPMs which helps dispense the right amount of coffee grounds, while the wide range of coffee drinks you can make with the Brera qualify it as the best and most affordable super automatic espresso machine for coffee lovers on a budget.
Some machines can be quite slow to work their way through programmes, but Jura have put a lot of thought into minimising these delays. The water heating tends to be the cause of the waits, so the F8’s solution is to heat it as it passes through the internal pipes of the machine. The technical detail is a bit beyond us, but it seems to work well. If you want to know more and like the geeky detail, give ‘Jura Thermoblock’ a Google!
It uses a stainless steel conical burr grinder to get your beans just right, and it has a high-pressure system to extract more flavor in less time. The foam frother is remarkable as it produces fine foam that will make your coffee look and taste so much better. You can clean the system out relatively easily, and it allows you to control the strength of your beverages. Finally, it has an energy saver mode, and it’s slimmer than other two-cup models.
What sets the Jura line of coffee machines apart for other similar coffee systems is that it does literally everything you need to do with the touch of a button. When preparing the machine, you simply load it with coffee and water, and if it’s your preference, milk or cream. We were originally concerned about cleaning dairy products out of the Jura as this can be a pain point with other systems. You don’t want dairy leftover in any part of the machine as it turns quickly and can easily ruin upcoming batches of coffee. But with the Jura, you load the milk into an easy to remove and clean stainless steel canister making the clean up super simple.
Not trouble free, as they all seem to jam periodically, but easily fixed. Per J-C, the problem is using very oily beans, which we do as we love very dark, heavily roasted Starbucks beans. The part that jams is the press mechanism. When it expresses the puck, it clogs and won't go back up. This seems to be a criticism for many of its machines, but it's hardly a deal breaker.
As with all other blade grinders, transferring grinds to a machine or another container is a messy process. Its grind uniformity cannot compete with a burr mill of comparative price. While adequate for finer grinds, the Capresso 503.05 still underperforms for French press and cold brew. Furthermore, as with all other blade grinders on the market, this one suffers from a buildup of coffee dust. With a tiny bit more money, you can get a much more versatile machine like the 559 (#4 in this list) or 560 Capresso burr grinder (#2).
“My wife and I love this espresso maker. It makes a wonderful and hot espresso, cappuccino and coffee. It is easy to use as well as maintain daily and seems fairly foolproof for me. Love that Jura has added so many automated reminders and safety features to keep it easily running in tip-top shape. My only knock on it is that the milk frother does not get the milk foam quite hot enough. Drinks requiring a bit more milk (e.g., latte macchiato) tend to cool the overall drink down a bit too much for our tastes.” - Edmond, Amazon User
If you have some experience in the world of specialty coffee drinks, skip this short section in our Jura E8 coffee machine review, as you already know all of this. If you’re new to the game and coming from the world of drip-brew coffee, keep reading, because there’s a key difference between how espresso is made versus how your beloved drip-brew machine works.
One downside of the C65 is that it isn’t self-cleaning. If you don’t mind taking it apart and rinsing everything out manually, then that shouldn’t be an issue. However, as James mentioned, sometimes the bean holder will think that it’s empty when there are still grounds inside. Overall, it is a minor inconvenience, but it can be frustrating when you’re running late in the morning, and you get a smaller cup as a result.