First, I really wanted to like this machine. The specs, design, functionality, were exactly what I was looking for in a super automatic espresso machine, however the machine failed to perform the basic task of making espresso. I found the display, programming, controls, and size of the water chamber to be good. The milk frothing system was cumbersome as it required you to attach tubes each time you wanted a milk drink. When the system worked, the steamed milk was hot and the consistency was great for cappuccinos and lattes. However, if the tube was not connected precisely (very little room for error) the consistency of the milk was poor. I ended up having to restart the process several times as the tubes were not connected properly or they came loose as the milk was pumped. The tubes also presented an issue with clean up in that they had to be cleaned after each use.
THE CURE: Once weekly reach up inside with a hot, wet towel, and clean the round disk behind the flap that hangs down. If it jams, unplug and let it cool before turning it on - sometimes you may have to do this several times. It just happened this a.m., and I had to wait 1/2 hour between my 3rd and 4th cup :) The first time it happened, tech support walked me through the cleaning on the phone. The last time was more of a problem, and they shipped me a mailing label for a $245 complete rebuild, but I didn't have to use it.
I have had a Capresso C3000 super automatic for many years that I was starting to have some minor problems with (small water leak, tray sensors corroding) and decided it was time to get a replacement. I work from home and tend to drink coffee most of the day so I'm looking for something that works reliably and for a very extend period of time. I started looking at the new super automatics from the Jura Capresso based on the longevity of the old C3000. I will admit, it's the TFT display that really caught my eye on this one. I started looking thinking that I'd end up with a Z series, but the TFT display was what veered me over to this one.
I like that it does much the same as the higher end models do. The simple fact that it doesnt have a digital read out is to me the only difference between it and say and E8 model which is generaly more money. It makes great coffee as well as hot tea and the temperature is plenty hot while not being too hot. The steam frother makes some of the best froth I have ever experienced. Good sized reservoir compared to most. Simple to learn how to operate and clean. I bought it because my daughter was taking her E8 away and I didnt want to spend as much as she did.

This Jura Impressa F8 review is the first we’ve added to the site from the Swiss manufacturer. The first thing you notice is its classy appearance, in the ‘Piano Black’ colour scheme that’s going to make it look the part in any kitchen. As you read the review, it will become clear why the Impressa F8 has quickly taken the number three spot in our top ten models.


This machine can invade your dreams with all its capabilities. One of the coolest is its ability to automatically fully clean itself but don’t forget about the straight forward programming, which is so simple the only time you’ll need the manual is to figure out what buttons to hold down. Last but not lease, the capabilities of customizing your drink is even above the ESAM3500, which is impressive

The Impressa’s control panel is based around a central colour display that’s used to guide you though the process, which helps to turn a maze of functions into an intuitive set of menus (or a carousel as Jura call it). The control of the menus is achieved by a ‘rotary switch’ located on top of the machine at the front, neatly sandwiched between the power and program buttons. The buttons either side of the screen vary in purpose, depending what’s on the screen at the time. in general though, the screen splits into four zones, with each button used to select the corresponding zone.
The Jura E8 automatic coffee center offers eight, and at maximum strength, you’re getting sixteen grams of beans per shot, which makes for an excellent, stout cup of coffee!  We love the fact that this machine is capable of brewing such strong drinks, and if you’re a fan of stout, full-bodied coffee, it’s probably going to be one of your favorite aspects of this model.

The Jura espresso machine review highlighted above has highlighted all the aspects of the coffee machines. All the Jura products have received some of the best customer reviews. The flaws are very few, and they can be overlooked. Overall, the Jura coffee machines are a great investment. If you want to buy Jura coffee machines like Jura Ena Micro1 or Jura F7, Costco, Amazon and many other websites offer great discounts. Get hold of best Jura Espresso Machine today.


I had avoided automatics for a while simply because pulling a shot seemed like such a romantic notion. Hah! Switching to a schedule that kicks off at 5:45 AM makes anything 'automatic' look a whole lot sexier. I am setting aside $$$ so that when this one finally fails (and that should be a while - this machine demonstrates superior engineering), I can dart right to the store and buy another.
I had avoided automatics for a while simply because pulling a shot seemed like such a romantic notion. Hah! Switching to a schedule that kicks off at 5:45 AM makes anything 'automatic' look a whole lot sexier. I am setting aside $$$ so that when this one finally fails (and that should be a while - this machine demonstrates superior engineering), I can dart right to the store and buy another.
DeLonghi is well known in the world of coffee makers and with the Super Automatic Espresso and Cappuccino Maker, they really managed to create a product that is going to meet your needs for delicious espresso shots. First of all, what you’ll love about this model is the fact that it comes with a built-in burr grinder which ensures the beans are grinded immediately in order to make the freshest latte, cappuccino, coffee or espresso possible. Since this is a double boiler system, the wait time between espresso and steam is considerably reduced.

The ESAM3500.N features programmable menu settings, meaning that you can easily adjust the coffee temperature, water hardness, the 1h to 3h automatic shutoff, start time and clock. Regardless of how picky you may be when it comes to coffee, you’ll definitely get to prepare a delicious cup of your favorite blended thanks to the 5 settings for coffee strength, including extra strong, strong, regular, mild and extra mild. On top of that, there are 3 buttons which make it easy to choosing the cup size (large, espresso and ristretto).
The first notable downside to this economy grinder is the build quality. Although it is standard for high-end burr grinders to use stainless steel enclosures, the Capresso 559 is built from a cheaper plastic. Beyond its suspect longevity, the cheaper build also causes problems in functionality. For example, beans can jam the grinder chute, causing the machine to stop functioning until it is cleaned.
To really own your drinks, Jura designed the Impressa Z6 super-automatic espresso machine to include three brew temperature and three hot water temperature settings, ten coffee strength settings and ten milk temperature settings. It’s rare that we see so much flexibility for coffee strength, and rarer still to see a wide range of milk temperatures. In truth, many machines don’t feature milk temperature settings at all, so we were excited to brew with the Z6, and it didn’t disappoint. The Impressa Z6 quickly ramps up from brew to steam temperature in a short six seconds, so it’s great for people like us, who need caffeine (and need it now!). For a more full-bodied espresso and decidedly thicker crema, the Impressa Z6 uses Jura’s proprietary Pulse Extraction Process, to fire short pulses of water through the grounds during brewing, in order to get the most out of the extraction. Jura’s innovative TFT display shows, in living color, your personal list of favorite drinks right on the main screen and ready to brew at the push of a button. A longer list of up to 21 customizable specialty drinks is browsable via the rotary switch, so you won’t step on anybody’s toes at the office programming a drink to your particular specifications.
These machines and their respective technologies will serve you well, no matter what it is you are looking for. Keep in mind that with all their features and functionality, more expensive machines are almost always going to fall on the side of excessive for casual users. Because of this and their high cost, you may want to pick a few features that stand out to you and forgo the unnecessary frills.
First of all, the TFT display will notify you when you are running low on anything (which the F8 lacks), and it will tell you when it needs cleaning. Having this kind of automatic reminders ensures that you can extend the lifespan of your machine. The other thing that we like about the E6 better than the F8 is the grinder. The G3 grinder system is a significant improvement.
The Jura E8 automatic coffee center offers eight, and at maximum strength, you’re getting sixteen grams of beans per shot, which makes for an excellent, stout cup of coffee!  We love the fact that this machine is capable of brewing such strong drinks, and if you’re a fan of stout, full-bodied coffee, it’s probably going to be one of your favorite aspects of this model.
This hefty Capresso burr grinder is built with a heavy-duty zinc die-cast housing, making it sturdy and reliable. Its large 8-ounce hopper ensures that you won’t be refilling your coffee beans for days. Its burr grinding mechanism produces consistent, uniform grinds in 16 different texture settings, from Turkish at the finest to French press at the coarsest. Because the Capresso 565 has a low RPM, low-heat grinder design, it causes minimal degradation to your coffee beans. 
A “proper” machine that can deliver both single and double shot espressos, its spout has a dual opening allowing you to make two coffees simultaneously. There’s also a steam wand for foaming milk, and the water tank has a decent 1.2l capacity, meaning you won’t need to refill it after making three cups o’ joe. In addition to ground coffee, it’ll also accept E.S.E. coffee pods (we weren’t able to test these, but as they’re made in almost precisely the same way as regular espressos, we imagine they’ll work just fine).
Jura Capresso was born in 1994 as a company that aimed to deliver high-end European style coffeemakers to the American market. Eight years later, it entered into a joint venture agreement with Jura AG, a Swiss developer and distributor of automatic coffee centers that is present in more than 50 countries. By 2008, Jura AG had become the sole owner of all Jura Capresso operations.
Some machines can be quite slow to work their way through programmes, but Jura have put a lot of thought into minimising these delays. The water heating tends to be the cause of the waits, so the F8’s solution is to heat it as it passes through the internal pipes of the machine. The technical detail is a bit beyond us, but it seems to work well. If you want to know more and like the geeky detail, give ‘Jura Thermoblock’ a Google!

When prompted by the machine that it’s time to clean, find the “clean” option under the various cleaning programs and be prepared to follow the instructions it gives you. This is usually as quick as emptying the grounds tray and pressing the rotary dial one more time. Please a cup or jug under the spout to capture the cleaning waste that will be dispelled from the machine. You will hear the machine perform an initial rinse, and then prompt you to add the cleaning tablet which will be inserted into the pre-ground coffee compartment. After another push of the rotary button, the machine will go through an approximately 20 minute cycle so you’ll want to do it when you have a bit of time.


The one-touch approach extends far beyond simply grinding your coffee. Anything that you do with the Jura is going to be accomplished with that original a single button. This is a welcomed departure from other more advanced coffee systems which claim to be one-touch, but require you to do a lot of additional work when making more complicated drinks.

Jura does not make any budget-friendly machines, so you should come in expecting to make an investment. Prices range from $800 for a single cup machine, to above $5,000 for Jura’s top of the line model. You can always search for refurbished models, and Jura occasionally offers factory serviced machines that function like new, but have been returned to the company for unspecified reasons.
×