The Delightful: The sleek, elegant and intuitive Jura-Capresso S8 makes it easy for anyone to whip up gourmet long crema coffees, espressos, cappuccinos, and lattes effortlessly at home. Users have ultimate control over the strength and flavor of the brew, and even those impaired by early-morning caffeine deficiencies can make a sublime cup of coffee in minutes.
Like other Jura machines, the spouts can be adjusted 2.6-4.4” to accommodate any size cup or beverage. We found the adjustable spout really handy in preventing and splashing or spillover onto the machine which limits clean up and also help create the perfect crema. We found the foam that the C65 produced to be incredibly light with almost a light, feather consistency. While the cost of this unit is slightly higher, our calculations had it paying for itself after only a few months. When we tracked the amount of coffee used and compared it to how much it would have been if purchased from a coffee shop, the Jura paid for itself quicker than you might expect. Not to mention these machines are incredibly well built and will last for years before ever needing to be repaired or serviced. And when that time does come, Jura has always been responsive and communicative which makes sending the unit in painless.
First of all, these machines are actually coffee machines that will prepare you the perfect espresso shot, cappuccino, etc with the push or touch of a single button, unlike semiautomatic coffee makers. So when you press the button, the machine will ground whole beans, adjust the right dose of ground coffee to be used, but also place and then tamps the coffee and finally brews it and dispense it.
For those who tend to like their java a bit more robust and flavorful, this espresso machine offers a coffee and steam wand that you can use to adjust the potency of your coffee. If you prefer a bit less vigor to your morning espresso, simply move the wand to the steam side to add a bit more water. This will allow you to share your espresso maker with those around you who prefer a stronger or milder taste you do and still keep everyone happy.
Together, they help coffee enthusiasts prepare the perfect espresso every single time. Use the center spouts to select from hot water for tea, a shot of espresso, or a cup of coffee or opt for milk for hot chocolate, cappuccinos or lattes. The interface of the XS90 is very user friendly and given the fact it features automatic cleaning capabilities, you don’t need to worry about cleaning it yourself.
This is probably one of the more important points to note – just how easy it is to get started. Bean to cup coffee machines tend to fall into two categories, they are either easy to use but inflexible, or take time to master and give a lot of opportunity to experiment. This Jura machine gives a lot of scope to both, which is great if you’re short on practice time or not sure if you’ve got the skills needed just yet.
My first Jura was the F7. I bought it off of Ebay(new) and couldn't have been happier. I was so thrilled with it, that I bought another (F9) and gave my mom the F7 because it was such an awesome machine. It is really remarkable how the machine works. It took me a good 15+ cups to figure out how to make the coffee the way I like it. There are so many options on this machine that effect the taste: Grind, water temp, quantity of beans, quantity of water, etc.... In reference to the service I am amazed. When I received my new F9, I immediately had problems with a couple of the buttons. I called the service center and was on hold for 6-8 minutes. After about a 2 minute conversation with the representative they said that she would just send out a new machine and when I get it to send my old machine back in the box. They paid all postage. No credit card, nothing. I've never heard of such a service before. Absolutely Excellent. I couldn't be happier. It is a great machine that makes very good coffee and looks really nice on the kitchen counter. I love my Jura! As a matter of fact, I believe I am going to go and make myself a decaf latte right down.
A “proper” machine that can deliver both single and double shot espressos, its spout has a dual opening allowing you to make two coffees simultaneously. There’s also a steam wand for foaming milk, and the water tank has a decent 1.2l capacity, meaning you won’t need to refill it after making three cups o’ joe. In addition to ground coffee, it’ll also accept E.S.E. coffee pods (we weren’t able to test these, but as they’re made in almost precisely the same way as regular espressos, we imagine they’ll work just fine).
You don’t even have to deal with the coffee grounds right away: they just drop into a little box that needs periodic emptying. Like the the 1.4l water tank, this box slides out of the front of the machine, which means you don’t need to fumble around at the back or move it away from the wall every few cups of coffee you make. It’s a nice touch, especially as the water tank in particular requires regular topping up: every time you switch the machine on, it flushes water through its pipes to keep them clean. It’s a bit of a faff, but it has its benefits: the NC-ZA1 makes a surprisingly delicious cup of coffee.
It’s a lovely looking, all-metal thing, with even accessories like the tamper and milk jug exuding an air of quiet, understated luxury. The portafilter is reassuringly weighty and solid, locking into the group head with a satisfying twist. There are clever little touches you can’t see or immediately feel that add to the feeling of quality too: on top is a tray that warms your cups, and the 2l water tank has an integrated, changeable filter.
To enable the filter and coffee machine to communicate, JURA uses modern RFID technology. Any machine fitted with the intelligent water system (I.W.S.®) recognises when a filter is inserted, automatically switches to filter mode and starts the rinsing process. When the filter capacity is nearly used up the machine prompts the user to change the filter. If the filter is not changed, the machine activates descaling mode. After a certain amount of use, the user is prompted to descale the machine. This can only be done when the filter is removed, so there is no more risk of user error resulting from misunderstandings.
First, I really wanted to like this machine. The specs, design, functionality, were exactly what I was looking for in a super automatic espresso machine, however the machine failed to perform the basic task of making espresso. I found the display, programming, controls, and size of the water chamber to be good. The milk frothing system was cumbersome as it required you to attach tubes each time you wanted a milk drink. When the system worked, the steamed milk was hot and the consistency was great for cappuccinos and lattes. However, if the tube was not connected precisely (very little room for error) the consistency of the milk was poor. I ended up having to restart the process several times as the tubes were not connected properly or they came loose as the milk was pumped. The tubes also presented an issue with clean up in that they had to be cleaned after each use.
Most modern coffee machines will feature a foam frother and this is also a vital part of a coffee machine like the Jura C65. The majority of users actually require this feature in order to make tasty lattes and cappuccinos. The good news is that the Jura C65 does indeed feature a revolutionary fine foam technology that ensures the milk has lots of foam. On top of that, the coffee spout’s height is adjustable, so you can easily fit a wide range of cups ranging from sixty five millimeters and up to one hundred and eleven millimeters.