Flipping open the tank lid reveals a plastic wand that houses a charcoal water filter pod (one is provided in the box). The filter setup sits within a special receptacle on the tank's interior left side. According to Capresso, the gadget will remove up to 82 percent of "the chlorine and other impurities found in tap water, and will do so for about six weeks, assuming you make one pot (10 cups) daily. It's a nice option to have, especially if you live in an area with substandard water, although remembering to swap in a new filter can be a drag.
This is where a fully automatic espresso machine comes in handy. Once you have set up the machine and tweaked all the settings, you can’t go wrong anymore. All preparation steps are fully automated, the dosage, the tamping, the grind size, temperature, extraction time, etc… You can expect consistent results, a great espresso shot every time. Maybe that’s why many restaurants decided to go with super automatic machines.

The Jura C60 has a fairly large water tank with a capacity of sixty four ounces. The bean hopper also has a respectable capacity of seven ounces and features an aroma preservation lid as well. As for the brew drawer, you won’t need to empty it too soon, since it can hold up to sixteen pucks of coffee. On top of that, the C60 also comes with a bypass doser, which means that on top of whole beans, you can also brew pre-ground coffee.
The ENA Micro 5 is the next level of technology in the ENA Micro line. It is also one of the smallest machines on the list, fairly priced, and incorporates more functionality into the machine than the ENA Micro 1. This includes the option to brew two cups of espresso at the same time, with a dual and height-adjustable spout, as well as Aroma+ technology to keep your coffee beans fresh.
What sets the Jura line of coffee machines apart for other similar coffee systems is that it does literally everything you need to do with the touch of a button. When preparing the machine, you simply load it with coffee and water, and if it’s your preference, milk or cream. We were originally concerned about cleaning dairy products out of the Jura as this can be a pain point with other systems. You don’t want dairy leftover in any part of the machine as it turns quickly and can easily ruin upcoming batches of coffee. But with the Jura, you load the milk into an easy to remove and clean stainless steel canister making the clean up super simple.
The interface is also very clean and easy to use and given the fact that it also has a function for automatic cleaning, you don’t have to worry about cleaning the machine yourself. However, probably the most notable feature (among others) of the XS90 is the fact that it features a low noise design. What I mean by that is that the burr grinder is perfectly insulated and has the lowest noise grinding of any espresso machine on the market today.
To enable the filter and coffee machine to communicate, JURA uses modern RFID technology. Any machine fitted with the intelligent water system (I.W.S.®) recognises when a filter is inserted, automatically switches to filter mode and starts the rinsing process. When the filter capacity is nearly used up the machine prompts the user to change the filter. If the filter is not changed, the machine activates descaling mode. After a certain amount of use, the user is prompted to descale the machine. This can only be done when the filter is removed, so there is no more risk of user error resulting from misunderstandings.
Semi-automatic espresso machines are just that—semi-automatic. Some of the steps are automated, but many are not. This allows the user to put their personal stamp on the final product but without doing some of the tedious steps that are involved in making an espresso on the stove top. Here’s a look at some of the features that make a semi-automatic espresso machine such a great pickup for the ultimate espresso lover:
Milk Frother. Fitted with two exchangeable spouts, this unit provides a choice between two options. One option is like a professional grade spout that allows the user to froth the milk manually. The other is for those who are less interested in the intricacies of froth, providing a pre-set option for either cappuccino (more foam) or latte (less foam).
When you think of other “one-touch” coffee solutions on the market, what typically comes to mind are single serve coffee machines that utilize K-cups or some other kind of coffee pod. While these definitely changed the game when first introduced, they leave a lot to be desired in terms of waste and the Jura has evolved past them. K-cups and coffee pods produce an extreme amount of plastic, cardboard and foil that is filling up landfills as at a rapid pace. Not to mention, by the time the coffee gets to your machine, the grounds have been sitting on the shelf for months and are most likely very stale.
The interface is also very clean and easy to use and given the fact that it also has a function for automatic cleaning, you don’t have to worry about cleaning the machine yourself. However, probably the most notable feature (among others) of the XS90 is the fact that it features a low noise design. What I mean by that is that the burr grinder is perfectly insulated and has the lowest noise grinding of any espresso machine on the market today.

If I could say anything that would help you make a decision it is this: this is a stylish sexy machine that brews the perfect cup of coffee every single time! Cleaning is simple! The machine is QUIET! I would not trade this for a brand new installed Miele, well maybe if they swapped me even I would, but I've had many cups out of their machines and in all honesty the Jura is better! Don't be afraid of the refurbished machines! Buy this machine and enjoy it as much as my wife and I have ours! I hope this helped someone make a decision! If you are anything like my wife and I, the coffee machine is much more than an appliance! It's is a member of the family and in this family we take our coffee very seriously! We love each other and we love our Jura!!!
It uses a stainless steel conical burr grinder to get your beans just right, and it has a high-pressure system to extract more flavor in less time. The foam frother is remarkable as it produces fine foam that will make your coffee look and taste so much better. You can clean the system out relatively easily, and it allows you to control the strength of your beverages. Finally, it has an energy saver mode, and it’s slimmer than other two-cup models.
In just 60 seconds, the Impressa C9 will steam or froth milk, tamp, grind, brew and clean itself. And if you’re looking to brew other drinks, you can use the hot water dispenser for tea, or to enjoy a cup of foamy hot chocolate. You have options to choose the cup size and strength of your coffee for a truly personal brew. Of course, the Impressa C9 also uses a water filter to ensure your coffee tastes as fresh and pure as possible.
The interface is also very clean and easy to use and given the fact that it also has a function for automatic cleaning, you don’t have to worry about cleaning the machine yourself. However, probably the most notable feature (among others) of the XS90 is the fact that it features a low noise design. What I mean by that is that the burr grinder is perfectly insulated and has the lowest noise grinding of any espresso machine on the market today.
When looking for the perfect super automatic espresso maker, it can be a bit difficult to know which model and brand to consider and that’s because there are so many of them out there, it can become confusing even for those who are not at their first espresso machine. The majority of reviews written by so called “experts” just confuse people more, while the comparison charts available online add to the uncertainty. So which of the many models available are actually required for you and your specific application?
From the outside, the Giga 5 looks attractive. It has a color TFT (thin film transistor) LCD screen display on the top front and center, with a stylish aluminum chassis with black plastic sides. This unit will definitely enhance the look of any kitchen. There’s a dedicated hot water spout at the front of the machine plus a couple of adjustable spouts for making coffee. Located on top of the unit you will find on/off buttons, a program button, and a rotary switch that is key to navigating the Giga’s menu.
For those really into their coffee drinks, and I mean obsessively so, a separate grinder is an absolute must. That loud noise you hear in the coffee shop every time you go in? That’s the grinder. Now, after saying that, let me tell you the grinder in the F7 is quiet and fast. So don’t worry about your kitchen ending up sounding like a coffee shop’s barista station.
1) After much research, I purchased the F9 at Williams Sonoma, primarily because they used to have a policy that you could return anything, at any time, if needed. So, I figured that if ever I had an issue, I could just return it to my local Williams Sonoma and get a replacement rather than returning the machine to the factory and waiting. Turns out I did indeed have to do this once for an electrical issue, which was actually an issue I had with the wiring at the outlet--not the machine afterall! In any event, I don't think Williams Sonoma still has that same open-ended return policy. Be sure to research the return policy wherever you make your purchase!

Mixed Reviews. Searching various sources, Jura ENA 5 Reviews seem to have either “love it” or “hate it” reviews and very few in between. This can indicate that the machine is a good design that works well at first, but may not in the long run, and the company is not always stellar at getting machines fixed. Common themes among negative reviews include broken parts and the machines simply stopped functioning.
×