Six years and 7540 shots of espresso. The only downside of this machine is that it is too easy to use so that you end up drinking more cups than you might otherwise. It's very fast to heat up, both for the main heating block, as well as for steam. The steamer wand takes some practice to get good, tight foam, but once you figure out the technique it's not difficult. The openings in the wand can clog up if you don't wipe it down right after use. I also give a short blast of steam right after that as well. After about five years we bundled it up and sent it in to the factory for cleaning and reconditioning. It came back as good as new and it's still going strong. About the only real negative aspect to the machine is that it tends to be a bit noisy, but probably no more so than someone using a fully manual pull machine and grinder.
One of the things that makes Jura such a world-renown coffee company is that their machines are so easy to use. As long as you have beans, water, and milk in the container, all you have to do is push a button and wait for the perfect cup to arrive. In this case, the Impressa F8 is one of the more technologically proficient models, thanks to its TFT screen.
One of the things that makes Jura such a world-renown coffee company is that their machines are so easy to use. As long as you have beans, water, and milk in the container, all you have to do is push a button and wait for the perfect cup to arrive. In this case, the Impressa F8 is one of the more technologically proficient models, thanks to its TFT screen.
Any coffee-based beverage is only going to be as enjoyable as the beans that are used to make it. If you don’t already, you will need to source high-quality, whole coffee beans and drink enough coffee to make sure that those beans aren’t going stale. You can use any beans that you like, but small batch and single-origin coffee beans are going to make a world of difference over bulk and mass-produced coffee beans.
As previously mentioned, this grinder is a bit less sturdy than its new revision, the 565. The 560 has the same issues with its mechanical timer, with the grind mechanism starting before you have had a chance to set the time. This results in a somewhat inconsistent grind quantity. The hopper lid is also not completely airtight, so it isn’t recommended that you keep your beans in it for more than a few days. The same issue with static buildup is also present, and may lead to a messy countertop.
The design of the Giga 5 is beautiful, and the clean lines running up and across the unit make it modern and sophisticated. Due to the fact that the Giga 5 has two grinders, pumps and heating systems, it produces a good amount of internal heat. Jura solves this problem by automatically diverting the heat and steam away from the machine via the visually appealing “venti ports,” which in turn provide fresh air into the system.

The Z9 also has a number of advanced features. These include a wireless connection, which can interact with the Jura Cool Control system to warn you when the milk level is low, and integrated cleaning programmes that mean you don't need to manually clean the brewing unit. The milk frother can automatically make creamy milk for cappuccino and lattes.
Whatever you’re into, the Impressa F8 has a coffee for you. While it’s great for the common choices like espresso and americano, it’s just as capable of serving up a macchiato too, or pretty much anything else you can think of. Of course, the more skilled you are as a barista, the more experimental you’ll be able to be, but if you just want something easy, stick with the 13 preset programmes and enjoy what Jura’s experts have created for you in advance.

The improvements are quite a few, including the four selectable strength options that helps determine the dosage of the shots you want to brew between five and sixteen grams of coffee. If you want, you can easily tailor your experience with programmable pre-brewing, brew temperature and water volume. You can make the adjustments by using the rotary switch and the good news is that the machine will remember your preferences so you can brew the same delicious cup of coffee next time.
Swiss-manufacturer Jura specializes in crafting high-end specialty coffee makers capable of competing with professional coffee shops. They are available in a wide range of pricing options, and if you’re in the market for one, there are some features to keep in mind. First, know what it actually brews. Jura machines are typically capable of making regular coffee, espresso, and other favorites, so be aware of what you are purchasing. Does it offer a high level of customization, and one-touch operation for those wishing to keep it simple? Is it easy to maintain and clean? Specialized features like adjustable coffee spouts and large-sized water reservoirs are also available.

The ultra-modern frother technology prepares milk foam of unprecedented quality. The foam is both fine and compact, giving it a creamy consistency with a subtle sweetness. The frothers have two separate chambers in which the milk is frothed twice. Any bubbles that form will burst, compacting the foam and making it extremely fine. Three bars in the frother spout slow down the foam as it exits the frother, so it is poured slowly and evenly into the cup.
Like other Jura machines, the spouts can be adjusted 2.6-4.4” to accommodate any size cup or beverage. We found the adjustable spout really handy in preventing and splashing or spillover onto the machine which limits clean up and also help create the perfect crema. We found the foam that the C65 produced to be incredibly light with almost a light, feather consistency. While the cost of this unit is slightly higher, our calculations had it paying for itself after only a few months. When we tracked the amount of coffee used and compared it to how much it would have been if purchased from a coffee shop, the Jura paid for itself quicker than you might expect. Not to mention these machines are incredibly well built and will last for years before ever needing to be repaired or serviced. And when that time does come, Jura has always been responsive and communicative which makes sending the unit in painless.
The Aroma G3 grinder uses conical steel burrs and six degrees of fineness to grind quickly, thanks to the perfected cutting angles that produce 60% less residual grounds. The result is a quieter grinder that preserves more of the flavor and aroma of the freshly ground beans while operating twice as fast. An integrated bypass doser allows for pre-ground coffee brewing.
The Wrap-up: While someone with simple tastes may be content with a twenty dollar automatic drip coffee maker or instant powders, real coffee lovers will appreciate the finer points of the Jura-Capresso S8. Not only will this superb machine turn out brews worthy of elegant European cafes, but it does so with a surprisingly little effort from the user, thanks to its simple “one-touch” programming.

While it might seem odd to mention, some people do like to use pre ground coffee with a bean to cup machine, at least occasionally. A common reason is to get a cup of decaffeinated coffee from time to time, without needing to empty out the beans from the hopper, make a drink then switch it all back again. Similarly, if you have a brand of pre-ground coffee that you like as a change from your normal freshly ground beans every so often, the Impressa F8 has you covered.
Although it may seem somewhat inconvenient, we like it because it makes it easier to clean the milk container. Other features that come with the ENA 9 include a sturdy conical burr grinder, an energy saver mode to keep your electricity bills under control, and customizable coffee strengths. Also, you can adjust the amount of water that comes out, both in your coffee or if you want to use the machine as a hot water dispenser.
In creating a stripped down, low-priced grinder that is still able to deliver a high-quality grind Capresso has released a machine that only features what is truly important in a coffee grinder. Absent are all the automatic or intelligent features that are found on more expensive grinders and instead this one has only reliability and basic ease of use left.
To really own your drinks, Jura designed the Impressa Z6 super-automatic espresso machine to include three brew temperature and three hot water temperature settings, ten coffee strength settings and ten milk temperature settings. It’s rare that we see so much flexibility for coffee strength, and rarer still to see a wide range of milk temperatures. In truth, many machines don’t feature milk temperature settings at all, so we were excited to brew with the Z6, and it didn’t disappoint. The Impressa Z6 quickly ramps up from brew to steam temperature in a short six seconds, so it’s great for people like us, who need caffeine (and need it now!). For a more full-bodied espresso and decidedly thicker crema, the Impressa Z6 uses Jura’s proprietary Pulse Extraction Process, to fire short pulses of water through the grounds during brewing, in order to get the most out of the extraction. Jura’s innovative TFT display shows, in living color, your personal list of favorite drinks right on the main screen and ready to brew at the push of a button. A longer list of up to 21 customizable specialty drinks is browsable via the rotary switch, so you won’t step on anybody’s toes at the office programming a drink to your particular specifications.
Always keeping ahead of the curve and improving, Jura has managed to create a machine that not only mimics, but also builds up and improves on previous models. The C60 is the successor of the highly popular C5 and what makes it special is the fact that it offers the same excellent 1-touch functionality that helps millions prepare their perfect espresso in seconds and with improved convenience.
As with other Jura machines, the Impressa Z6 is hygienic and conveniently cleans up after itself. The extra large 2.4 L water tank has a handle for easy removing, and is designed to work with a Smart Water Filter, which uses RFID technology to communicate with the control panel about its lifespan, automatically alerting you when it needs changing. Using a filter ensures great tasting coffee and reduces the need for descaling. The Impressa Z6 automatically rinses on start up, and keeps a reminder to clean the milk circuit on-screen when needed. All of the maintenance processes, such as brew group cleaning and descaling, will throw alerts as well, and are easily accessed through the TFT display where they can be performed by pressing a button. Step up to the Giga 5 for a dual grinder, dual boiler machine for high speed brewing and added functionality; or for a smaller machine you can control with your smartphone, take a look at the intuitive, ultra-convenient J6.
To really own your drinks, Jura designed the Impressa Z6 super-automatic espresso machine to include three brew temperature and three hot water temperature settings, ten coffee strength settings and ten milk temperature settings. It’s rare that we see so much flexibility for coffee strength, and rarer still to see a wide range of milk temperatures. In truth, many machines don’t feature milk temperature settings at all, so we were excited to brew with the Z6, and it didn’t disappoint. The Impressa Z6 quickly ramps up from brew to steam temperature in a short six seconds, so it’s great for people like us, who need caffeine (and need it now!). For a more full-bodied espresso and decidedly thicker crema, the Impressa Z6 uses Jura’s proprietary Pulse Extraction Process, to fire short pulses of water through the grounds during brewing, in order to get the most out of the extraction. Jura’s innovative TFT display shows, in living color, your personal list of favorite drinks right on the main screen and ready to brew at the push of a button. A longer list of up to 21 customizable specialty drinks is browsable via the rotary switch, so you won’t step on anybody’s toes at the office programming a drink to your particular specifications.
This is a high-end coffee machine that has a price tag of around $5,000. You can choose from over 20 various types of coffee drinks with this professional unit, which can serve you faster than a Starbucks barista. It can do almost everything you can expect from a sophisticated coffee machine. If you consider yourself a coffee connoisseur, you owe it to yourself to upgrade to the Jura Giga 5 Coffee Maker.
There are many ways to make a single coffee drink and preferences will naturally vary. With the Jura coffee machine, there are tons of opportunities to customize the details and fine-tune your daily coffee experience. If there is something you don’t like or want prepared differently, you can reprogram the ratios for certain beverages to match your personal tastes. For example, if you like you macchiato with slightly less milk (I know I do), you can adjust the ratio so there is a bit more coffee than the factory setting serves. If you like your coffee extra hot, that setting can be adjusted globally on the Jura as well. Don’t worry though, anything you customize can be reversed for a one off coffee drink in case you want to make something for a guest and they don’t necessarily share you tastes in coffee. We love that Jura understands everyone has slightly difference tastes and makes adjusting the settings of the machine easy to do.
Jura machines all have self-cleaning technologies that prevent scaling, powder buildup, and other problems typical of the industry. That being said, you will need to become familiar with and regularly purchase self-cleaning fluids and tablets that the machine uses to maintain itself. These products are typically included on the page where you buy, but in the event that they are not, we have you covered in our reviews.
×