It’s highly efficient, meaning that you don’t get as much ground residue after processing your beans. Not only does this ensure that your coffee tastes (and smells) better, but it saves on the cleaning process. Finally, the E6 has a separate milk frother and spout. Instead of pouring milk through one of the nozzles that can be used for coffee (this model also can make two cups simultaneously), the E6 keeps it all separated.
Even better, you won’t have to worry about stale water ever again and that’s because the ThermoBlock technology is going to channel the right amount of water required by the specific drink you’re preparing. On top of that, you also don’t need to worry about experiencing any metallic taste in your coffee and that’s thanks to the machine’s stainless steel lining.
Jura ENA Micro 90 One Touch Automatic Coffee Center: It might be the world’s smallest automatic machine but it offers big features. The compact machine can prepare a cappuccino and a latte macchiato at the touch of a button and, thanks to fine foam technology, the fine milk foam is always creamy and sweet. The Micro 90 also features a professional grade conical burr grinder, a powerful pump that produces 15 bars of pressure and a one-touch display.

After extensive researching of current high(er) end coffee machines, I purchased the Jura C65 to replace my Jura F7 - which had finally failed after 11 years of reliable service. Set-up was fast and easy -- instruction booklet is well organized with useful diagrams. Am completing the 1st week of daily use: so far so good. The C65 produces excellent coffee. Controls are less complicated than my old F7, and it is easy to adjust to fit individual tastes -- strength, cup size, temperature, etc. Only fret is reliability -- will it match the duration of the F7?
The IMPRESSA J9 is probably the most popular model after the newer Micro 9 due to its breadth of features and overall precision when brewing and crafting a litany of specialty coffee drinks. The concept behind the J9 could not be simpler: simply use the rotary dial to select your desired drink, press the button, and sit back and enjoy. This model is absolutely beautiful and looks like it was pulled right out of an Italian café. The matte sheen and silver hard plastic give the J9 and functional sophistication that will definitely impress you.
It’s affordable (£70 at Argos at the time of writing; Dolce Gusto pods are priced at around £4 for a box of 16) and incredibly simple to set up and use. Simply fill the removable water tank with cold H2O, pop your chosen coffee pod into a slide-out drawer at the front, stick a cup under the spout and hit the power button. When it turns from red to green (a mere few seconds) the machine is ready. You then push the water lever either left (for cold drinks) or right (for hot drinks) until the desired amount of your drink is in the cup. Then slide out the drawer, expel the pod and throw it away.
Use of and/or registration on any portion of this site constitutes acceptance of our User Agreement (updated 5/25/18) and Privacy Policy and Cookie Statement (updated 5/25/18). Your California Privacy Rights. The material on this site may not be reproduced, distributed, transmitted, cached or otherwise used, except with the prior written permission of Condé Nast. Ad Choices.
If you are going to try to make other coffees with this machine, plan on doing some trial runs to get it right. Since you can adjust the amount of water and beans, you can make standard coffee if you want, but it’s not going to be as good as the espresso. Overall, we only recommend this to espresso drinkers, but it’s nice to know that you can make other beverages if and when you want a change.
The Micro 1 differs from many other Jura machines in that it is only designed to produce perfectly pulled espresso and coffee. This, however, does not mean it lacks features. The ENA Micro 1 comes with a variable brewing chamber, a 15-bar pump, the pre-aroma system, the Aroma Plus built-in grinder, the thermoblock intelligent heating system and an adjustable spout. The Micro 1 is beautiful in its simplicity and makes delicious espresso perfectly. We love the unit for kitchens that are limited in space or as gift for the espresso connoisseur.
With the Impressa C9, you get programmed beverage buttons for espresso, cappuccino, coffee, hot water or milk. A 14oz. milk container is included and a burr grinder is built-into the machine. The 64-ounce removable water tank is easy to clean, and the ThermoBlock heating system keeps water at the optimal temperature. With an 18-bar power pump, this machine brews fantastic espresso.

The ultra-modern frother technology prepares milk foam of unprecedented quality. The foam is both fine and compact, giving it a creamy consistency with a subtle sweetness. The frothers have two separate chambers in which the milk is frothed twice. Any bubbles that form will burst, compacting the foam and making it extremely fine. Three bars in the frother spout slow down the foam as it exits the frother, so it is poured slowly and evenly into the cup.


When you think of other “one-touch” coffee solutions on the market, what typically comes to mind are single serve coffee machines that utilize K-cups or some other kind of coffee pod. While these definitely changed the game when first introduced, they leave a lot to be desired in terms of waste and the Jura has evolved past them. K-cups and coffee pods produce an extreme amount of plastic, cardboard and foil that is filling up landfills as at a rapid pace. Not to mention, by the time the coffee gets to your machine, the grounds have been sitting on the shelf for months and are most likely very stale.
There’s no steam wand for heating and foaming milk, but the Dolce Gusto system has its own way of doing that: drinks such as cappuccinos and lattes are made with two pods: one coffee pod and one special milk pod, used in the amounts specified on the pod lid. Drinking milk expelled from a pod isn’t as appetising as fresh cow juice, we think you’ll agree – but it’s less effort and less mess.

Maintenance and Cleaning: If you use steamed milk, I highly suggest changing the setting to display the "Rinse Milk System" prompt to appear right after using. The default is 10 minutes, and you cannot select this rinse from the Maintenance menu. The quicker you rinse out the milk residue, the less likely you are to get clogs. The manual also suggests to use the Jura Cappuccino Cleaner daily. I tend to rinse often and do a breakdown cleaning of the milk system and frother about every other day.
So far, we’ve been looking at Jura Coffee Makers that can do either one or two cups at once. However, if you don’t plan on sharing, then you probably want a single-serving model instead. The ENA 9 One Touch is one option that can both save money and counter space in your kitchen. Compared to other Jura units, this one has a lot of the same standard features.
Last but not least, this machine features 5 level water hardness selectors and makes it a breeze to set it to your specific water hardness. On top of that, it can also count the number of coffee cups you’ve consumed, how many times the machine was cleaned, how often the steam function was used and so on. If you want, you can keep stats on a daily basis.
Featuring chrome plated accents and a stainless steel font panel, the Brera is an espresso machine that is very aesthetically pleasing. If you want, you can also get the side panels in silver or black. Functionality wise, the Brera is able to prepare a wide range of coffee types, including specialty coffee and pre-ground decaffeinated coffee thanks to its bypass doser. You can also make lattes, cappuccinos and macchiatos thanks to the machine’s Rapid Steam Technology and Panarello Wand.
The Impressa Z6 employs Jura’s innovative Pulse Extraction Process brewing system. As opposed to a constant flow, water is instead pulsed through the grounds in short intervals that extract greater intensity and aroma while shortening the overall brew time. With P.E.P., espresso and ristretto can be prepared with greater clarity and flavor than ever before.
To enable the filter and coffee machine to communicate, JURA uses modern RFID technology. Any machine fitted with the intelligent water system (I.W.S.®) recognises when a filter is inserted, automatically switches to filter mode and starts the rinsing process. When the filter capacity is nearly used up the machine prompts the user to change the filter. If the filter is not changed, the machine activates descaling mode. After a certain amount of use, the user is prompted to descale the machine. This can only be done when the filter is removed, so there is no more risk of user error resulting from misunderstandings.
×