Yep, the Barista Express isn’t just an elegant, well-built espresso machine – it also features a built-in grinder, allowing you to make coffee with beans you’ve smashed into dust literally seconds earlier. Freshness means a lot in the coffee world, so this is a Big Deal – as is the low-pressure pre-infusion of the grounds before the water is forced through them at higher 50 bar pressure.

If you’re a froth fan, you won’t be disappointed – Jura machines tend to be very good frothers (if that’s a word) and manage to top off drinks to the same standard as you’ll usually find in the high street coffee shops. It’s certainly an impressive result, even if we found it was a novelty the wore off rather quickly. We’re not the biggest advocates of milk foaming though, so you might be more excited that we are!

This is made to order coffee, not the stuff sitting in the pot for hours on end. You might argue that the coffee shops grind their own coffee. And they do, but not for every cup (otherwise a $4 cup would be history for sure) and this is the main point. Their ground coffee is still sitting around exposed to air and going stale. The stuff in their pot or thermal tank just sits until empty.


It would be a mistake to say that there’s no learning curve at all on the E8.  It has one; it’s just not particularly steep.  Sure, there are a lot of settings, and a lot of things you can change, tweak and adjust, but honestly, the hardest part of its operation is going to be changing your preferred drink settings and familiarizing yourself with the way the menus work.
As previously mentioned, this grinder is a bit less sturdy than its new revision, the 565. The 560 has the same issues with its mechanical timer, with the grind mechanism starting before you have had a chance to set the time. This results in a somewhat inconsistent grind quantity. The hopper lid is also not completely airtight, so it isn’t recommended that you keep your beans in it for more than a few days. The same issue with static buildup is also present, and may lead to a messy countertop.
4) The coffee and espresso are great. I've learned to make a latte just like Starbuck's and I haven't been back since. Some people complain that the frother doesn't work well, but here's the trick: first, you should use non-fat or low-fat milk. For some reason, lower fat milk froths better every time; second, be sure to clean the frothing nozzle after each use. Kind of a no-brainer, I know. Third, there are two settings on the frother, and you can change the setting by sliding the sleeve on the frothing tip up or down. Experiment with this and you will get the perfect froth, really.
Flipping open the tank lid reveals a plastic wand that houses a charcoal water filter pod (one is provided in the box). The filter setup sits within a special receptacle on the tank's interior left side. According to Capresso, the gadget will remove up to 82 percent of "the chlorine and other impurities found in tap water, and will do so for about six weeks, assuming you make one pot (10 cups) daily. It's a nice option to have, especially if you live in an area with substandard water, although remembering to swap in a new filter can be a drag.
As with all other blade grinders, transferring grinds to a machine or another container is a messy process. Its grind uniformity cannot compete with a burr mill of comparative price. While adequate for finer grinds, the Capresso 503.05 still underperforms for French press and cold brew. Furthermore, as with all other blade grinders on the market, this one suffers from a buildup of coffee dust. With a tiny bit more money, you can get a much more versatile machine like the 559 (#4 in this list) or 560 Capresso burr grinder (#2).
Like other Jura machines, the spouts can be adjusted 2.6-4.4” to accommodate any size cup or beverage. We found the adjustable spout really handy in preventing and splashing or spillover onto the machine which limits clean up and also help create the perfect crema. We found the foam that the C65 produced to be incredibly light with almost a light, feather consistency. While the cost of this unit is slightly higher, our calculations had it paying for itself after only a few months. When we tracked the amount of coffee used and compared it to how much it would have been if purchased from a coffee shop, the Jura paid for itself quicker than you might expect. Not to mention these machines are incredibly well built and will last for years before ever needing to be repaired or serviced. And when that time does come, Jura has always been responsive and communicative which makes sending the unit in painless.
“My first impression was a great machine well built; the manual was more challenging than it should have been but not hard to follow. Once I got the machine set up it's been delivering consistently great coffee, the dry grounds it produces make cleaning easy, the display makes maintenance pretty self-explanatory, the operation is quiet, and it's an obvious improvement over my previous machine.
The buttons of the Jura XS90 can be easily programmed for setting volume, strength and temperature of the espresso dispensed. If you take a closer look at the right side of the XS90, you’ll notice that the multi function button is perfect for programming the lattes or cappuccino, including the strength and amount of milk, but also the temperature of espresso dispensed. If you want, then you can even adjust the milk’s foaminess.
We’re going to start with a rundown of the features of the Impressa F8, so that you know what you’re getting if you choose to buy. A lot of machines offer the same core functions, so we tend to focus on what stands out, so rest assured, if we rate a machine highly (as we do with this one), it’s going to be a good all rounder unless we specifically say otherwise.
2) Overall, I have to say I absolutely LOVE this machine. Here's how I rationalized payment for such an expensive indulgence: if you figure a Starbucks costs approx. $3, and you buy one everyday (which I was), it would take 600 cups to break even. Well, with the automatic counter on my machine, I have made more than 1600 cups! This machine paid for itself in the first year..easily. ok, so now that you're past the issue of paying so much for a coffee machine, here's more...

As an anecdote, I once failed one of my shots, it happens to everyone. The biggest problem with that cup was that it had almost no crema. I sipped it anyway, I wanted to see how it was. I was absolutely stunned by the taste of that shot. The unique combination of tamping and grind size made that cup more flavorful. It just didn’t have enough crema. Never judge an espresso by its looks. This is why some people hate Nespresso with a passion, it is very consistent, and it gives you a great shot with ample crema every time, but it is never fantastic. I love “fantastic”, but for the convenience, I settle for good, so Nespresso is one of my favorite coffeemakers. If convenience is what you are looking for mostly, take a look at our article that compares capsule-based espresso machines.
There’s no steam wand for heating and foaming milk, but the Dolce Gusto system has its own way of doing that: drinks such as cappuccinos and lattes are made with two pods: one coffee pod and one special milk pod, used in the amounts specified on the pod lid. Drinking milk expelled from a pod isn’t as appetising as fresh cow juice, we think you’ll agree – but it’s less effort and less mess.
The Jura XS90 features easy-to-use controls for setting temperature, volume, and strength of the coffee or espresso dispensed. There’s a large bean hopper with an integrated bean sensor that will remind users to refill the bean container. There’s also a water level sensor that makes sure there’s water in the removable water tank. Priced at around $2,000, this unit is probably the cheapest Jura with a one-touch capability.
Jura bean to cup coffee machines form a premium range that will appeal to readers with a higher budget level. With some machines moving up into the four figure range, they offer a high quality coffee to match that higher price tag. Many coffee lovers swear by the brand, as you would expect from a company that focuses on delivering high quality products.
Even better, you won’t have to worry about stale water ever again and that’s because the ThermoBlock technology is going to channel the right amount of water required by the specific drink you’re preparing. On top of that, you also don’t need to worry about experiencing any metallic taste in your coffee and that’s thanks to the machine’s stainless steel lining.

The Jura-Capresso S8 is a luxurious coffee and espresso machine with a long list of benefits and only a few detractors. The price would be the biggest obstacle for most consumers, and while those with pure coffee tastes may demure at the price tag, coffee connoisseurs who patronize the typical overpriced chain coffee shops could justify the expense. The bottom line is that one cannot fail to make perfect cafe-style drinks with the sexy, state-of-the-art S8 machine.
So I'm at my local Goodwill store and I was just getting ready to leave when one of the employees brought a cart out of the back with the Jura Capresso F9 sitting on it... I had drooled over their products online for quite a while now but sadly could not afford to drop 1900.00 (what they cost new) on an espresso machine. When I saw the F9 sitting on the cart I quickly grabbed it but noticed a tag on it that said "AS IS NO RETURN" and the price tag below reading $49.99. I was willing to take a chance & at $49.99 I figured I could always sell it for parts on an online auction and get my money back or even make a tiny profit if it didn't work. I got home and downloaded a manual plugged it in, programmed it, installed the filter (there were 4 new filters with it & that alone is worth the $49.99) added espresso beans & guess what it worked perfectly! I have since used it daily, mornings I have a quadruple espresso and evenings I have a latte with 2 shots... It's easy to clean & maintain and having paid only $49.99 I felt like I won the lottery ..
What a great price on this refurbished Jura Capresso Impressa F9. Our previous Jura Capresso lasted 10 years and made thousands of cups (sorry no counter on that model). I knew a refurbished model from this same maker would be a good bet. And sure enough it has proven to be just that. We have had it a month and have already made well over 250 cups with not one complaint. THANK YOU for making this product more affordable to the public with the refurbished price. During the economic recession we have been cutting cost when ever possible and I truly appreciate that this product was made available at such an exceptional price.
Like other Jura machines, the spouts can be adjusted 2.6-4.4” to accommodate any size cup or beverage. We found the adjustable spout really handy in preventing and splashing or spillover onto the machine which limits clean up and also help create the perfect crema. We found the foam that the C65 produced to be incredibly light with almost a light, feather consistency. While the cost of this unit is slightly higher, our calculations had it paying for itself after only a few months. When we tracked the amount of coffee used and compared it to how much it would have been if purchased from a coffee shop, the Jura paid for itself quicker than you might expect. Not to mention these machines are incredibly well built and will last for years before ever needing to be repaired or serviced. And when that time does come, Jura has always been responsive and communicative which makes sending the unit in painless.

In front of the water tank sits a large cone that holds either the machine's permanent gold filter or reusable Type 4 paper filters. Below that is a sturdy stainless steel thermal carafe to accept and decant your brew. On the left side of the metal coffee pot, you'll find a small keypad complete with tiny LCD screen and minuscule membrane-style buttons. The display also includes a digital clock for checking the time and programming automatic brewing cycles.

So far, we’ve been looking at Jura Coffee Makers that can do either one or two cups at once. However, if you don’t plan on sharing, then you probably want a single-serving model instead. The ENA 9 One Touch is one option that can both save money and counter space in your kitchen. Compared to other Jura units, this one has a lot of the same standard features.
I have had several super automatic coffee machines in the past 10 years. My wife and I are coffee lovers and our favorite time every day is sitting down together when I get home from work and talking over a cup of our favorite coffee. It was our quest, after we were married, to find the perfect way to brew coffee. it couldn't be the french press. We travel with one since most upscale hotels don't have a coffee maker in the room, but at home we want a perfect cup each time and every time! Our journey started with Saeco and I am not hear to bash their products! I've had 5 Saecos and still own 3. One is our backup. One we use when we entertain and need more than one machine and the third is broken. The broken one was our favorite and newest. I cleaned it one day and when I was reinserting the brew group a little piece of plastic broke and poof, there goes the machine. Of course I'll get it fixed, but this is the type of stuff we have always encountered with Saeco! Great machine...cheaply built. I decided that I was upgrading and trying a different brand. After a tremendous amount of research I settled on the Jura F7 refurbished. An almost $2,000 machine for $699 and a warranty. I couldn't see a risk and have had great luck with buying refurbished items. Let me tell you from the moment it arrived it has been the easiest to use machine we've ever owned! Again, I loved our Saeco's, but they are nothing in comparison to the Jura!!! The speed in which it grinds, tamps, brews and cleans is literally 60 seconds. It is so much quieter than Saeco and cleaning does not involve the removal of anything. Open a lid...drop in a cleaning tab...put a large cup under the spout and BAM...it's cleaning. 15 minutes later my machine said "READY"! I pressed a button and out came another perfectly brewed cup of my favorite coffee from a little plantation in Hawaii!
The Jura-Capresso S8 is a luxurious coffee and espresso machine with a long list of benefits and only a few detractors. The price would be the biggest obstacle for most consumers, and while those with pure coffee tastes may demure at the price tag, coffee connoisseurs who patronize the typical overpriced chain coffee shops could justify the expense. The bottom line is that one cannot fail to make perfect cafe-style drinks with the sexy, state-of-the-art S8 machine.
“I Love the convenience of having an automatic Cappuccino machine; it's easy to use and work around if you're used to electronic machines. I like the fact it cleans itself but what the manual and reviews don’t tell you - ALWAYS HAVE A CUP UNDER IT as it rinses a lot and sometimes it does it automatically. So Far So good hope it lasts for years and years.” - Duha, Amazon Customer
You can also make milky or foamed coffees, thanks to a tube that can be placed in a milk jug (or Panasonic’s own optional “Milktank” accessory). Or just have the machine squirt out hot water for tea-making. You can also tweak the amount of coffee, water and milk, and the temperature before a drink is made, and save up to four of these combinations on the machine as personal favourites.
The first thing you’ll probably notice when making your coffee is just how quiet the Giga 5 is. This is thanks to the two ceramic disk grinders that occupy each side of the unit and operate just above a whisper. These discs will probably never wear our and the grind on them is extremely precise and always consistent. It offers 18 completely customizable specialty drinks through the intuitive and easy to navigate display which provide enough variety to satisfy everyone’s tastes.
×