Starting with the brew unit, the first thing to understand is that it’s not removable.  From a practical perspective, what that means for you is that about once a week, you’ll need to pop a cleansing tab into the bypass doser to clean the unit.  No big deal, but our personal preference is for removable units you can rinse by hand to ensure a thorough cleaning.


Like the best espresso machines found in restaurants and cafes, the Capresso EC100 uses bar pressure to extract the greatest flavor out of coffee grounds. You can use finely ground coffee, or for greater convenience on a busy morning, you can make use of the pre-packaged espresso coffee pods. You can brew two cups of espresso at the same time, and you can get your cups toasty warm to keep your beverage hot longer by placing them on the stainless steel cup-warming tray on top.
Super Automatic Espresso Machines are remarkable devices that provide the pinnacle of espresso machine automation. They literally do almost everything for you but drink your espresso. A super automatic espresso machine typically will grind your coffee beans, properly measure them and the water to be used, froth milk for you, and dispense a perfect beverage for you with the touch of a button. Further, they will remember your favorite recipes and customization.
As previously mentioned, this grinder is a bit less sturdy than its new revision, the 565. The 560 has the same issues with its mechanical timer, with the grind mechanism starting before you have had a chance to set the time. This results in a somewhat inconsistent grind quantity. The hopper lid is also not completely airtight, so it isn’t recommended that you keep your beans in it for more than a few days. The same issue with static buildup is also present, and may lead to a messy countertop.
And that’s it. There’s very little in the way of cleaning or maintenance to be done, bar an occasional emptying of the drip tray, an occasional rinsing of the removable pod holder and, of course, the refilling of the water tank. The tank isn’t huge (0.8l), so you’ll need to do the latter fairly frequently. The drip tray, for its part, is adjustable – you can place it at one of three heights to suit the size of drinking vessel and reduce the chance of spillage.

If I could say anything that would help you make a decision it is this: this is a stylish sexy machine that brews the perfect cup of coffee every single time! Cleaning is simple! The machine is QUIET! I would not trade this for a brand new installed Miele, well maybe if they swapped me even I would, but I've had many cups out of their machines and in all honesty the Jura is better! Don't be afraid of the refurbished machines! Buy this machine and enjoy it as much as my wife and I have ours! I hope this helped someone make a decision! If you are anything like my wife and I, the coffee machine is much more than an appliance! It's is a member of the family and in this family we take our coffee very seriously! We love each other and we love our Jura!!!

While it might seem odd to mention, some people do like to use pre ground coffee with a bean to cup machine, at least occasionally. A common reason is to get a cup of decaffeinated coffee from time to time, without needing to empty out the beans from the hopper, make a drink then switch it all back again. Similarly, if you have a brand of pre-ground coffee that you like as a change from your normal freshly ground beans every so often, the Impressa F8 has you covered.

The one-touch approach extends far beyond simply grinding your coffee. Anything that you do with the Jura is going to be accomplished with that original a single button. This is a welcomed departure from other more advanced coffee systems which claim to be one-touch, but require you to do a lot of additional work when making more complicated drinks.
If you are going to try to make other coffees with this machine, plan on doing some trial runs to get it right. Since you can adjust the amount of water and beans, you can make standard coffee if you want, but it’s not going to be as good as the espresso. Overall, we only recommend this to espresso drinkers, but it’s nice to know that you can make other beverages if and when you want a change.

09/16/2010 - The C1000 finally gave out after 10+ years and service fees of $250. With all lights now flashing and the loudest grinding noise ever, it was confirmed today with Jura-Capresso Customer Service that this unit is not worth their new $250 service fee to repair (if it could be repaired). I still found the C1000 a great appliance and Jura-Capresso a very reputable company. From a cost-analysis perspective (and these are ONLY estimates), I consume about 700 cups per year which requires about 20 pounds of beans at $10 per pound (Fresh Market) or $200 per year. Ten years worth of coffee beans cost about $2,000. Add the $900 cost of the C1000, plus two $125 service fees, my total investment was around $3,150. I excluded the cost of water since we pay a minimal fee, but never use the charged amount. Equivalent cups of pressure brewed coffee (about $3 per cup from Starbucks) over this ten year period would cost about $21,000. I compare Starbucks prices since there is a huge quality difference between their pressure-brewed coffee and drip coffee at your local food mart. So my break-even point with the Jura-Capresso C1000 was between one and two years. The remaining eight to nine years of coffee I consumed was at no cost (when compared to Starbucks). This analysis only includes the direct financial cost and not the cost of your time/fuel getting to Starbucks. I happily accepted Jura-Capresso’s "one-time replacement offer" to upgrade my C1000 to a new IMPRESSA C5. The list price is $999, but the upgrade cost is only $600. Although my C1000 unit has experienced problems, it continues to be the most awesome coffee machine ever! Once my IMPRESSA C5 machine arrives and has been used a short time, I will post a new product review.Read full review...

Jura designates a new line of coffee machines whenever a major technological breakthrough is achieved. We will review these technologies in-depth in the following section, and provide more specs when we cover each individual machine. If you see a term that you don’t immediately understand, don’t worry, just reference the glossary in the next section!
Let’s take making a cappuccino with the Jura, for example. Instead of having to froth your milk manually, the Jura will froth the milk for you and layer it into your cappuccino perfectly. Forget having to clean a separate canister and frother; it’s all done for you right within the machine. The Jura can even tackle more complicated drinks such as a latte macchiato. The Jura will lay down a layer of foam on the bottom of your cup, add coffee, and finish it off with a perfect layer of foam on top creating a truly authentic latte macchiato.
The other point that we wanted to highlight isn’t necessarily a negative per se, but just the fact that it’s a lot to spend, and let’s face it – it is! There’s a lot of machines available in the sub £500 range, and we’d never advocate or encourage spending more than you can afford. Having said that, you do get what you pay for, and in this case we believe it’s exceptional quality. If you really love coffee, it’s probably worth paying as much as you’re comfortable with to get a great machine, and that’s exactly what you’re getting here.

If you’ve been using espresso machines for quite a while now, then you are probably fully aware of what makes a good espresso machine. Running a fifteen-bar pressure into the grounds, the Jura C65 can easily extract the right flavor from your coffee beans. Better yet, you can use its wide range of programmable options in order to adjust the brewing temperatures with two levels to boot, coffee strength (in four levels) and also the amount of water used.


Starting with the brew unit, the first thing to understand is that it’s not removable.  From a practical perspective, what that means for you is that about once a week, you’ll need to pop a cleansing tab into the bypass doser to clean the unit.  No big deal, but our personal preference is for removable units you can rinse by hand to ensure a thorough cleaning.
Operation is dead simple with the three-button interface on the top of the machine where you select from thee user-defined cup sizes (espresso, lingo and ristretto) and two aroma levels. The special aroma preservation technology does a great job of keeping the beans fresh and the Aroma Plus grinder precisely grinds them to a consistent size every time. The intelligent pre-heating feature is going to ensure that the coffee is always hot and topped with a light and airy crema.
Alright, for the person whose coffee/espresso interest borders on obsession (or strong passion if you will) the F7 probably won’t satisfy. Mainly because of the built-in grinder. For someone who’s aiming for perfection in their brew, a precision standalone grinder and a standalone coffee maker is going to be what they need to look for to really dial in their perfection.

The Jura A9 truly shines in the milk drinks department. It features 2 height adjustable spouts that go anywhere from two point two and up to five point four inches if you plan on using taller However, when it comes to the milk, the machine uses a pick-up tube system. What this means is that now you can just place the tube into the milk container and prepare delicious milk based drinks. For better results though, it’s best that you either get Jura’s cool control milk cooler or their optional thermal milk container. That’s because not only is it better to keep milk chilled for sanitary reasons, but chilled milk also produces better froth.
The sleepyheads in your house will love the 8 profile feature, which saves up to 8 drinks per person for an easy, fool-proof brew every time. Simply select a profile and the desired drink for an easy brew even when you’re half asleep! Or select from one of 17 pre-programmed recipes, all available at the touch of a button on the one-touch digital screen.
Mixed Reviews. Searching various sources, Jura ENA 5 Reviews seem to have either “love it” or “hate it” reviews and very few in between. This can indicate that the machine is a good design that works well at first, but may not in the long run, and the company is not always stellar at getting machines fixed. Common themes among negative reviews include broken parts and the machines simply stopped functioning.
×