Together, they help coffee enthusiasts prepare the perfect espresso every single time. Use the center spouts to select from hot water for tea, a shot of espresso, or a cup of coffee or opt for milk for hot chocolate, cappuccinos or lattes. The interface of the XS90 is very user friendly and given the fact it features automatic cleaning capabilities, you don’t need to worry about cleaning it yourself.
As we continue on our journey of Jura Coffee Makers, the Impressa C65 is another “standard” unit. It doesn’t have all of the accouterments of higher-end models, but it still makes an incredible cup of coffee, and it offers the speed and convenience that you would expect from Jura. Overall, we would compare this model to the ENA 9 above, although this one can make two cups at once.

The IMPRESSA C65 is a true workhorse when it comes to delivering amazing coffee and espresso drinks. Many reviewers have reported this model holding up for years in high-traffic environments where the machine is producing drinks throughout the day. Like all Jura coffee machines, the C65 is as simple as turning it on, selecting your drink, and having it ready to consume in under a minute. The simple and compact design of the IMPRESSA 65, coupled with its refined accents of matte and gloss make this unit memorable yet understated and perfect for any kitchen.
It might seem like a trivial point, but not all machines have thought about this. The Jura’s power cable emerges at the bottom of the rear of the machine, making it very easy to plug it in and neatly arrange any excess cable out of sight. There’s also a ‘master’ power switch in the same location – worth noting as we discovered, having thought the machine was dead on arrival after pressing the power button on top and nothing happening!

Some of the more popular mass market coffee machines are starting to look a little bit dated (not least the hugely popular and bestselling ESAM4200 by Delonghi), but that couldn’t be further from the truth with the Jura Impressa F8. It’s a very stylish and sophisticated looking machine, that wouldn’t look out of place in an upmarket cafe or bar. Jura have managed to pack a lot of controls in to the unit to give near unparalleled control over coffee making, yet retain a fairly minimalist look. There’s something about a black and silver finish that just looks the part, particularly on kitchen appliances that sit on the worktop – you don’t want something ugly to look at as a permanent fixture in the kitchen!
The different types of espresso machines include stove top espresso machine, pump less electric machine, manual lever pump, electronic pump, semi-automatic pump, automatic pump, super automatic pump, etc. Further, the Jura coffee machines have some interesting features. According to many Jura espresso machine reviews, Jura Ena Micro 1 is the best espresso machine by Jura. Let us delve deeper into this machine.

The height of the cappuccino spout for latte macchiato and cappuccino and the coffee spout is continuously adjustable, the creation of perfect specialty drinks both in a small espresso cup and in a latte macchiato glass up to 6 inches tall. The integrated fine foam technology from JURA ensures unique milk foam quality with a fine, feather-light consistency.
It’s a lovely looking, all-metal thing, with even accessories like the tamper and milk jug exuding an air of quiet, understated luxury. The portafilter is reassuringly weighty and solid, locking into the group head with a satisfying twist. There are clever little touches you can’t see or immediately feel that add to the feeling of quality too: on top is a tray that warms your cups, and the 2l water tank has an integrated, changeable filter.
When prompted by the machine that it’s time to clean, find the “clean” option under the various cleaning programs and be prepared to follow the instructions it gives you. This is usually as quick as emptying the grounds tray and pressing the rotary dial one more time. Please a cup or jug under the spout to capture the cleaning waste that will be dispelled from the machine. You will hear the machine perform an initial rinse, and then prompt you to add the cleaning tablet which will be inserted into the pre-ground coffee compartment. After another push of the rotary button, the machine will go through an approximately 20 minute cycle so you’ll want to do it when you have a bit of time.

To enable the filter and coffee machine to communicate, JURA uses modern RFID technology. Any machine fitted with the intelligent water system (I.W.S.®) recognises when a filter is inserted, automatically switches to filter mode and starts the rinsing process. When the filter capacity is nearly used up the machine prompts the user to change the filter. If the filter is not changed, the machine activates descaling mode. After a certain amount of use, the user is prompted to descale the machine. This can only be done when the filter is removed, so there is no more risk of user error resulting from misunderstandings.
The ultra-modern frother technology prepares milk foam of unprecedented quality. The foam is both fine and compact, giving it a creamy consistency with a subtle sweetness. The frothers have two separate chambers in which the milk is frothed twice. Any bubbles that form will burst, compacting the foam and making it extremely fine. Three bars in the frother spout slow down the foam as it exits the frother, so it is poured slowly and evenly into the cup.

To really own your drinks, Jura designed the Impressa Z6 super-automatic espresso machine to include three brew temperature and three hot water temperature settings, ten coffee strength settings and ten milk temperature settings. It’s rare that we see so much flexibility for coffee strength, and rarer still to see a wide range of milk temperatures. In truth, many machines don’t feature milk temperature settings at all, so we were excited to brew with the Z6, and it didn’t disappoint. The Impressa Z6 quickly ramps up from brew to steam temperature in a short six seconds, so it’s great for people like us, who need caffeine (and need it now!). For a more full-bodied espresso and decidedly thicker crema, the Impressa Z6 uses Jura’s proprietary Pulse Extraction Process, to fire short pulses of water through the grounds during brewing, in order to get the most out of the extraction. Jura’s innovative TFT display shows, in living color, your personal list of favorite drinks right on the main screen and ready to brew at the push of a button. A longer list of up to 21 customizable specialty drinks is browsable via the rotary switch, so you won’t step on anybody’s toes at the office programming a drink to your particular specifications.
The machine is very nice looking in person, very sleek. The instruction manual is pretty sparse on details. It has enough, but it's a little intimidating for a first time user. I took my time and found out that the programming is very user friendly and easy to use. I have ours on our counter with a cabinet overhead. When I fill water reservoir I do pull the machine a bit forward because the reservoir is deep and you have to lift it straight up. It's easy to do but you need a bit of clearance. The bean hopper is in the back, so I pull the machine forward a bit to fill that, as well. Very easy to do. One thing I wanted in the J9 was the option to use a water filter. I have hard water from our tap, and had been filling our DeLonghi from our filtered refrigerator dispenser, but that was cumbersome. With the Jura filter I can fill the deep reservoir right in the little bar sink I have next to the machine. I tested the water before and after, and the Jura filter definitely works to reduce hardness, which is important in keeping the machine free from mineral scale buildup. I think it will be well worth the expense of replacing the filters. It came with one filter and a couple of descaling tabs, which I have not had to use yet.

With the Impressa C9, you get programmed beverage buttons for espresso, cappuccino, coffee, hot water or milk. A 14oz. milk container is included and a burr grinder is built-into the machine. The 64-ounce removable water tank is easy to clean, and the ThermoBlock heating system keeps water at the optimal temperature. With an 18-bar power pump, this machine brews fantastic espresso.
Jura has several coffee machines on the market at several different price points so if you were planning on investing in one (and they are an investment), we’d like to help you make sense of the different features and make clear what you gain and lose as you look at different models while deciding which one is the best fit for your kitchen. In this thorough Jura review guide, we are going to cover what makes the Jura so special and ultimately worth the money, what the best features of each unit are, what to look out for when deciding on a model, and most importantly which Jura coffee machine to buy.
With most super automatic machines, when preparing your favorite drink there is undoubtedly going to be a loss of quality in the process, but that is not the case with the PrimaDonna S Deluxe from DeLonghi. The ECAM26455M uses an integrated frothing system and the milk container in order to immediately deliver to your cup both the right amount of frothed or steamed milk and freshly brewed espresso.
If the machine you choose doesn’t have a built-in milk frother, Jura’s Automatic Milk Frother If you click this link and make a purchase, we earn a commission at no additional cost to you. will prepare cold, warm, or hot milk foam for use in different espresso-based drinks. Operation of the frother is simple (just one touch), and the machine is designed to pair with any Jura coffee machine.
Althought this is a refurbished machine, it looks and operates as a newly minted one. Watch the DVD which comes with it before you do anything and the set up and operations will be easy and foolproof, and I'll promise you a steaming perfect cup the 1st time. My wife loves this beauty. It was her Christmas gift. Works just like the company promises. The challenge now is to keep enough coffee beans in the kitchen. Jura-Capresso 13185 Impressa F7 Espresso Machine, Silver Metallic
1) After much research, I purchased the F9 at Williams Sonoma, primarily because they used to have a policy that you could return anything, at any time, if needed. So, I figured that if ever I had an issue, I could just return it to my local Williams Sonoma and get a replacement rather than returning the machine to the factory and waiting. Turns out I did indeed have to do this once for an electrical issue, which was actually an issue I had with the wiring at the outlet--not the machine afterall! In any event, I don't think Williams Sonoma still has that same open-ended return policy. Be sure to research the return policy wherever you make your purchase!
It uses a stainless steel conical burr grinder to get your beans just right, and it has a high-pressure system to extract more flavor in less time. The foam frother is remarkable as it produces fine foam that will make your coffee look and taste so much better. You can clean the system out relatively easily, and it allows you to control the strength of your beverages. Finally, it has an energy saver mode, and it’s slimmer than other two-cup models.
09/16/2010 - The C1000 finally gave out after 10+ years and service fees of $250. With all lights now flashing and the loudest grinding noise ever, it was confirmed today with Jura-Capresso Customer Service that this unit is not worth their new $250 service fee to repair (if it could be repaired). I still found the C1000 a great appliance and Jura-Capresso a very reputable company. From a cost-analysis perspective (and these are ONLY estimates), I consume about 700 cups per year which requires about 20 pounds of beans at $10 per pound (Fresh Market) or $200 per year. Ten years worth of coffee beans cost about $2,000. Add the $900 cost of the C1000, plus two $125 service fees, my total investment was around $3,150. I excluded the cost of water since we pay a minimal fee, but never use the charged amount. Equivalent cups of pressure brewed coffee (about $3 per cup from Starbucks) over this ten year period would cost about $21,000. I compare Starbucks prices since there is a huge quality difference between their pressure-brewed coffee and drip coffee at your local food mart. So my break-even point with the Jura-Capresso C1000 was between one and two years. The remaining eight to nine years of coffee I consumed was at no cost (when compared to Starbucks). This analysis only includes the direct financial cost and not the cost of your time/fuel getting to Starbucks. I happily accepted Jura-Capresso’s "one-time replacement offer" to upgrade my C1000 to a new IMPRESSA C5. The list price is $999, but the upgrade cost is only $600. Although my C1000 unit has experienced problems, it continues to be the most awesome coffee machine ever! Once my IMPRESSA C5 machine arrives and has been used a short time, I will post a new product review.Read full review...

Swiss-manufacturer Jura specializes in crafting high-end specialty coffee makers capable of competing with professional coffee shops. They are available in a wide range of pricing options, and if you’re in the market for one, there are some features to keep in mind. First, know what it actually brews. Jura machines are typically capable of making regular coffee, espresso, and other favorites, so be aware of what you are purchasing. Does it offer a high level of customization, and one-touch operation for those wishing to keep it simple? Is it easy to maintain and clean? Specialized features like adjustable coffee spouts and large-sized water reservoirs are also available.


Now we’ve looked at what the machine can do, let’s turn our attention to what really matters, what real life customers think. We’ve had a good look around at reviews on the web, and collated the common themes. Hopefully this will give you a real feel for what is good and not so good about this machine, with some battle testing thrown into our Jura Impressa F8 review!

Embodying the tradition and soul of over seven and a half decades of experienced in one super automatic espresso machine, the new Gaggia Anima is one of the top fully automatic espresso machines you can currently get. The incredible beauty of this model combines tradition and modernity in a distinctive and elegant design that can easily outlive trends and fads. When it comes to how easy it is to use it, the Anima features a digital display and designated drink buttons, meaning that no matter if you want to enjoy a cappuccino or espresso shot, you can easily program the machine to do it in seconds. Better yet, to suit your preferences, you can easily customize each drink option in order to get the perfect taste.


Everything about the Gira 5 is perfectly designed and engineered to produce incredible coffee drinks at twice the pace of other units. If we had a need for this much coffee this is the model we would buy, but our current consumption simply doesn’t warrant it. The Giga 5 is very popular in office settings but we also know families who entertain that have it in their home.
I was somewhat apprehensive about purchasing this, but 2 weeks in very satisfied with our purchase. The coffee and espresso quality is excellent. Pleasantly surprised with the milk steamer, the lattes I’ve made are as good as any big coffee shop. It’s also easy to maintain and clean, takes about 2 minutes everyday. I can’t imagine a machine being easier to use.
Just by the water canister (which holds just under two litres), there’s a replaceable water filter that cleans the water as the machine begins each cycle. Depending where you live, this may carry a different weight of importance, but if you’re in an area where water has a strong taste, this may well be a big plus towards buying the Jura Impressa F8 over other machines. Water is such a big part of making coffee, it will go a long way towards giving consistent results day after day!
×