When you think of other “one-touch” coffee solutions on the market, what typically comes to mind are single serve coffee machines that utilize K-cups or some other kind of coffee pod. While these definitely changed the game when first introduced, they leave a lot to be desired in terms of waste and the Jura has evolved past them. K-cups and coffee pods produce an extreme amount of plastic, cardboard and foil that is filling up landfills as at a rapid pace. Not to mention, by the time the coffee gets to your machine, the grounds have been sitting on the shelf for months and are most likely very stale.
Jura ENA Micro 90 One Touch Automatic Coffee Center: It might be the world’s smallest automatic machine but it offers big features. The compact machine can prepare a cappuccino and a latte macchiato at the touch of a button and, thanks to fine foam technology, the fine milk foam is always creamy and sweet. The Micro 90 also features a professional grade conical burr grinder, a powerful pump that produces 15 bars of pressure and a one-touch display.
2) Overall, I have to say I absolutely LOVE this machine. Here's how I rationalized payment for such an expensive indulgence: if you figure a Starbucks costs approx. $3, and you buy one everyday (which I was), it would take 600 cups to break even. Well, with the automatic counter on my machine, I have made more than 1600 cups! This machine paid for itself in the first year..easily. ok, so now that you're past the issue of paying so much for a coffee machine, here's more...
Jura machines all have self-cleaning technologies that prevent scaling, powder buildup, and other problems typical of the industry. That being said, you will need to become familiar with and regularly purchase self-cleaning fluids and tablets that the machine uses to maintain itself. These products are typically included on the page where you buy, but in the event that they are not, we have you covered in our reviews.
One downside of the C65 is that it isn’t self-cleaning. If you don’t mind taking it apart and rinsing everything out manually, then that shouldn’t be an issue. However, as James mentioned, sometimes the bean holder will think that it’s empty when there are still grounds inside. Overall, it is a minor inconvenience, but it can be frustrating when you’re running late in the morning, and you get a smaller cup as a result.
Turn, press, enjoy – that’s how easy it is to enter the world of IMPRESSA C65 With the one-switch operating concept of the Rotary Switch and the 11-language plain text display, it’s easy to create the perfect coffee every time. Thanks to the high-performance conical grinder, the beans are always freshly ground. The simple, compact design with its elegant combination of matte and gloss black gives the IMPRESSA C65 an imposing yet understated look in any surroundings.
The digital control panel makes it easy to play with the programmable menu settings, including coffee strength, temperature, auto off and start time. You can also prepare cappuccino and espressos without having to wait between them thanks to the double boiler system that the ESAM5500B features. Lastly, no matter what coffee you plan on using with it, it’s going to be properly ground thanks to the professional quality conical low pitch burr grinder.
One of the essential selling points of this coffee maker is that it comes with two grinders. This allows you to mix and match between different beans, such as if you want to have regular or decaf as an option. The grinders themselves are also better than anything else that Jura offers. Instead of metal, they are ceramic, which not only means that they last longer, but they are much quieter.
Turn, press, enjoy – that’s how easy it is to enter the world of IMPRESSA C65 With the one-switch operating concept of the Rotary Switch and the 11-language plain text display, it’s easy to create the perfect coffee every time. Thanks to the high-performance conical grinder, the beans are always freshly ground. The simple, compact design with its elegant combination of matte and gloss black gives the IMPRESSA C65 an imposing yet understated look in any surroundings. 

When prompted by the machine that it’s time to clean, find the “clean” option under the various cleaning programs and be prepared to follow the instructions it gives you. This is usually as quick as emptying the grounds tray and pressing the rotary dial one more time. Please a cup or jug under the spout to capture the cleaning waste that will be dispelled from the machine. You will hear the machine perform an initial rinse, and then prompt you to add the cleaning tablet which will be inserted into the pre-ground coffee compartment. After another push of the rotary button, the machine will go through an approximately 20 minute cycle so you’ll want to do it when you have a bit of time.
I’m Geoff. I love coffee, and have tried a bunch of different coffee making techniques and gadgets over the years – everything from fancy La Marzocco’s, to industrial Bunn’s, to Aeropress, and even (gag) instant. While bean selection and the actual making of coffee tends to get a lot of attention, the grinding of the beans is often overlooked (or bypassed). Scroll back up and find the right grinder for you.
2) Overall, I have to say I absolutely LOVE this machine. Here's how I rationalized payment for such an expensive indulgence: if you figure a Starbucks costs approx. $3, and you buy one everyday (which I was), it would take 600 cups to break even. Well, with the automatic counter on my machine, I have made more than 1600 cups! This machine paid for itself in the first year..easily. ok, so now that you're past the issue of paying so much for a coffee machine, here's more...
I have had several super automatic coffee machines in the past 10 years. My wife and I are coffee lovers and our favorite time every day is sitting down together when I get home from work and talking over a cup of our favorite coffee. It was our quest, after we were married, to find the perfect way to brew coffee. it couldn't be the french press. We travel with one since most upscale hotels don't have a coffee maker in the room, but at home we want a perfect cup each time and every time! Our journey started with Saeco and I am not hear to bash their products! I've had 5 Saecos and still own 3. One is our backup. One we use when we entertain and need more than one machine and the third is broken. The broken one was our favorite and newest. I cleaned it one day and when I was reinserting the brew group a little piece of plastic broke and poof, there goes the machine. Of course I'll get it fixed, but this is the type of stuff we have always encountered with Saeco! Great machine...cheaply built. I decided that I was upgrading and trying a different brand. After a tremendous amount of research I settled on the Jura F7 refurbished. An almost $2,000 machine for $699 and a warranty. I couldn't see a risk and have had great luck with buying refurbished items. Let me tell you from the moment it arrived it has been the easiest to use machine we've ever owned! Again, I loved our Saeco's, but they are nothing in comparison to the Jura!!! The speed in which it grinds, tamps, brews and cleans is literally 60 seconds. It is so much quieter than Saeco and cleaning does not involve the removal of anything. Open a lid...drop in a cleaning tab...put a large cup under the spout and BAM...it's cleaning. 15 minutes later my machine said "READY"! I pressed a button and out came another perfectly brewed cup of my favorite coffee from a little plantation in Hawaii!
There are other factors to consider, such as color and material, but most Jura machines come with customizable aesthetics. We will cover more in-depth things to know in the next couple of sections, but for now, hold on to this list of general thoughts as we begin to browse the different Jura lines and examine what each different type of machine has to offer.
While we can sing the praises of the E6 all day, the fact is that there is a bit of a learning curve with it. The instruction manual can be a little confusing to some people, and setting up your cleaning system can take a while. Also, plan on spending more time with maintenance than you would with other coffee makers. In the end, it ensures that your machine is always ready to go, but it can be a bit of a time investment.
I have had a Capresso C3000 super automatic for many years that I was starting to have some minor problems with (small water leak, tray sensors corroding) and decided it was time to get a replacement. I work from home and tend to drink coffee most of the day so I'm looking for something that works reliably and for a very extend period of time. I started looking at the new super automatics from the Jura Capresso based on the longevity of the old C3000. I will admit, it's the TFT display that really caught my eye on this one. I started looking thinking that I'd end up with a Z series, but the TFT display was what veered me over to this one.
On the inside, the Anima features a ceramic burr grinder which can be easily configured to one of five grind settings in order to accommodate the blend and roast of your espresso. If you want, there’s also an option that allows you to use the bypass doser in order to brew pre ground coffee. For hassle free maintenance, the machine makes use of the company’s patented removable brew group. There are of course, other features you’re going to love about this model, including the digital display that alerts you when maintenance is required, pre-infusion, 60 oz water reservoir, Rapid Steam Technology, adjustable coffee dispenser and low energy consumption standby mode.

Jura has focused on producing espresso machines that provide the utmost in quality and innovation. The company has been making historic products ever since its inception in 1994 for the Espresso and Coffee brewing arena. Jura coffee centers not only deliver superior performance, convenience, and reliability, but are also designed with elegance and style that give each of their espresso coffee machines a rare blend of form and function.
While it might seem odd to mention, some people do like to use pre ground coffee with a bean to cup machine, at least occasionally. A common reason is to get a cup of decaffeinated coffee from time to time, without needing to empty out the beans from the hopper, make a drink then switch it all back again. Similarly, if you have a brand of pre-ground coffee that you like as a change from your normal freshly ground beans every so often, the Impressa F8 has you covered.
The machine is very nice looking in person, very sleek. The instruction manual is pretty sparse on details. It has enough, but it's a little intimidating for a first time user. I took my time and found out that the programming is very user friendly and easy to use. I have ours on our counter with a cabinet overhead. When I fill water reservoir I do pull the machine a bit forward because the reservoir is deep and you have to lift it straight up. It's easy to do but you need a bit of clearance. The bean hopper is in the back, so I pull the machine forward a bit to fill that, as well. Very easy to do. One thing I wanted in the J9 was the option to use a water filter. I have hard water from our tap, and had been filling our DeLonghi from our filtered refrigerator dispenser, but that was cumbersome. With the Jura filter I can fill the deep reservoir right in the little bar sink I have next to the machine. I tested the water before and after, and the Jura filter definitely works to reduce hardness, which is important in keeping the machine free from mineral scale buildup. I think it will be well worth the expense of replacing the filters. It came with one filter and a couple of descaling tabs, which I have not had to use yet.
It comes pre-loaded with default recipes for latte macchiato, cappuccino, an espresso shot, a ristretto shot, coffee, coffees, hot water, and steamed milk. All of the recipes can be customized via "Expert Mode". You can adjust the strength (1 - 5 beans), volume in ounces or mL's), steamed milk amount (based on time in seconds). You can also adjust all of the parameters while making the drink without saving, which is great for guests. Basic operation is very simple and straightforward. The TFT display makes this super user friendly. Anyone can easily scroll thru using the wheel on top of the machine and pick whatever type of drink they want. Or, you can select most drinks directly from the TFT screen as well. For two shots or two cups of coffee, hit the button twice. You can also enter the recipe modification mode by holding the drink selection button as well. Grind adjustment is via a knob under the back right top cover. It also displays graphics of your drink while it's being made.
The interface is also very clean and easy to use and given the fact that it also has a function for automatic cleaning, you don’t have to worry about cleaning the machine yourself. However, probably the most notable feature (among others) of the XS90 is the fact that it features a low noise design. What I mean by that is that the burr grinder is perfectly insulated and has the lowest noise grinding of any espresso machine on the market today.

That’s a pity because as auto-frothers go, it’s a very good one.  The one thing we’re not so crazy about is the fact that you’ve got to run plastic tubing from your milk source (you have to provide your own, by the way – you do not get one when you purchase the machine) to the frothing arm, which makes your very expensive coffee machine look like a high school science project.
Even better, you won’t have to worry about stale water ever again and that’s because the ThermoBlock technology is going to channel the right amount of water required by the specific drink you’re preparing. On top of that, you also don’t need to worry about experiencing any metallic taste in your coffee and that’s thanks to the machine’s stainless steel lining.
Because this Capresso grinder uses the same high-quality, low RPM conical burr grinder design as the 565, this machine preserves the subtlest aromatics of your coffee beans. It produces a consistent, uniform, and delicious grind in 16 settings, suitable for almost any brew types. Its large hopper is convenient, and will store several days worth of beans at a time.
First, I really wanted to like this machine. The specs, design, functionality, were exactly what I was looking for in a super automatic espresso machine, however the machine failed to perform the basic task of making espresso. I found the display, programming, controls, and size of the water chamber to be good. The milk frothing system was cumbersome as it required you to attach tubes each time you wanted a milk drink. When the system worked, the steamed milk was hot and the consistency was great for cappuccinos and lattes. However, if the tube was not connected precisely (very little room for error) the consistency of the milk was poor. I ended up having to restart the process several times as the tubes were not connected properly or they came loose as the milk was pumped. The tubes also presented an issue with clean up in that they had to be cleaned after each use.

The one-touch approach extends far beyond simply grinding your coffee. Anything that you do with the Jura is going to be accomplished with that original a single button. This is a welcomed departure from other more advanced coffee systems which claim to be one-touch, but require you to do a lot of additional work when making more complicated drinks.


4) The coffee and espresso are great. I've learned to make a latte just like Starbuck's and I haven't been back since. Some people complain that the frother doesn't work well, but here's the trick: first, you should use non-fat or low-fat milk. For some reason, lower fat milk froths better every time; second, be sure to clean the frothing nozzle after each use. Kind of a no-brainer, I know. Third, there are two settings on the frother, and you can change the setting by sliding the sleeve on the frothing tip up or down. Experiment with this and you will get the perfect froth, really.
I love this machine. I also have a krupps super automatic as well and I prefer this one. One complaint though is that the spout height is slightly low and so I cannot fit certain mugs in there. Not a deal breaker but it is an inconvenience. The thing I like about the jura is the ability to bypass the whole bean grinder and use preground coffee. Since with any super automatic, you need to be very careful about the oiliness of the bean, this is a great feature when you still want flavored coffee. The interface isn't very difficult to learn and it is quite the beauty sitting on the counter.
The Jura E8 automatic coffee center offers eight, and at maximum strength, you’re getting sixteen grams of beans per shot, which makes for an excellent, stout cup of coffee!  We love the fact that this machine is capable of brewing such strong drinks, and if you’re a fan of stout, full-bodied coffee, it’s probably going to be one of your favorite aspects of this model.
This Jura Impressa F8 review is the first we’ve added to the site from the Swiss manufacturer. The first thing you notice is its classy appearance, in the ‘Piano Black’ colour scheme that’s going to make it look the part in any kitchen. As you read the review, it will become clear why the Impressa F8 has quickly taken the number three spot in our top ten models.
There's one other area needing fixing, not only in these machines but in all super automatics I've ever tried - tiny puck sizes (diameter) = bad extraction. That's not me saying it. That's Dr. Illy and a wide range of scientific tests that the Illy labs have done finding the optimal puck size for superior extraction. At 46mm, these pucks are too tiny.
This machine allows you to serve yourself the best coffee one can dream of. No need to drive to your local coffee house. This vitually maintenance free machine makes expresso or regular coffee from your favorite whole beans. Simply poor in the beans of your choice and press the button for the freshest cup of Joe you now can only buy from Starbucks. I loved this machine so much that I upgraded to the Z5 which is top of the line and alot more money. C1000 is a proven long lasting machine. I have used it every day for over a year now without any problems whatsoever. For the money you cannot find better coffee anywhere. I paid for this machine almost 2 times in the first year from the savings by eliminating my early morning coffee stops.
The Impressa’s control panel is based around a central colour display that’s used to guide you though the process, which helps to turn a maze of functions into an intuitive set of menus (or a carousel as Jura call it). The control of the menus is achieved by a ‘rotary switch’ located on top of the machine at the front, neatly sandwiched between the power and program buttons. The buttons either side of the screen vary in purpose, depending what’s on the screen at the time. in general though, the screen splits into four zones, with each button used to select the corresponding zone.
Operation is dead simple with the three-button interface on the top of the machine where you select from thee user-defined cup sizes (espresso, lingo and ristretto) and two aroma levels. The special aroma preservation technology does a great job of keeping the beans fresh and the Aroma Plus grinder precisely grinds them to a consistent size every time. The intelligent pre-heating feature is going to ensure that the coffee is always hot and topped with a light and airy crema.
With most super automatic machines, when preparing your favorite drink there is undoubtedly going to be a loss of quality in the process, but that is not the case with the PrimaDonna S Deluxe from DeLonghi. The ECAM26455M uses an integrated frothing system and the milk container in order to immediately deliver to your cup both the right amount of frothed or steamed milk and freshly brewed espresso.
It’s a lovely looking, all-metal thing, with even accessories like the tamper and milk jug exuding an air of quiet, understated luxury. The portafilter is reassuringly weighty and solid, locking into the group head with a satisfying twist. There are clever little touches you can’t see or immediately feel that add to the feeling of quality too: on top is a tray that warms your cups, and the 2l water tank has an integrated, changeable filter.
I have had a Capresso C3000 super automatic for many years that I was starting to have some minor problems with (small water leak, tray sensors corroding) and decided it was time to get a replacement. I work from home and tend to drink coffee most of the day so I'm looking for something that works reliably and for a very extend period of time. I started looking at the new super automatics from the Jura Capresso based on the longevity of the old C3000. I will admit, it's the TFT display that really caught my eye on this one. I started looking thinking that I'd end up with a Z series, but the TFT display was what veered me over to this one.
If the machine you choose doesn’t have a built-in milk frother, Jura’s Automatic Milk Frother If you click this link and make a purchase, we earn a commission at no additional cost to you. will prepare cold, warm, or hot milk foam for use in different espresso-based drinks. Operation of the frother is simple (just one touch), and the machine is designed to pair with any Jura coffee machine.
×