When looking for a fully automatic espresso machine, you have the choice to go for either a dual heating system or a single heating system machine. For instance, if you go for a dual boiler machine, then when you’re going to start the steam model, you’ll need to wait for about ten seconds until steam is available. With a single element system, the wait time increases by a factor of 5 and it takes about fifty seconds to get steam.
Like other Jura machines, the spouts can be adjusted 2.6-4.4” to accommodate any size cup or beverage. We found the adjustable spout really handy in preventing and splashing or spillover onto the machine which limits clean up and also help create the perfect crema. We found the foam that the C65 produced to be incredibly light with almost a light, feather consistency. While the cost of this unit is slightly higher, our calculations had it paying for itself after only a few months. When we tracked the amount of coffee used and compared it to how much it would have been if purchased from a coffee shop, the Jura paid for itself quicker than you might expect. Not to mention these machines are incredibly well built and will last for years before ever needing to be repaired or serviced. And when that time does come, Jura has always been responsive and communicative which makes sending the unit in painless.
My daughter and her husband thought this was a great product. He likes his coffe real strong so can adjust it to his taste. She likes tea so the steamer is great for her. (I hear she is getting back into the cappacionos!) Also with dual spigots on the machine he can make 2 cups at a time for him and his best buddy in the early AM. I have'nt tried it yet, but when I do I'll give a report on it. This machine runs around $1200 new, I bought it refurbished for $400. Heck of a deal!
There is a learning curve and one has to get the coffee to water ratio correct for one's preferences...changing it for other drinkers. But it is truly automatic, which is nice for serving more than one person quickly, brews quickly and makes very good coffee. Jura took this machine and rewired it per the wiring recall on this model, returned it, all at no cost to me.

So far, we’ve been looking at Jura Coffee Makers that can do either one or two cups at once. However, if you don’t plan on sharing, then you probably want a single-serving model instead. The ENA 9 One Touch is one option that can both save money and counter space in your kitchen. Compared to other Jura units, this one has a lot of the same standard features.
Six years and 7540 shots of espresso. The only downside of this machine is that it is too easy to use so that you end up drinking more cups than you might otherwise. It's very fast to heat up, both for the main heating block, as well as for steam. The steamer wand takes some practice to get good, tight foam, but once you figure out the technique it's not difficult. The openings in the wand can clog up if you don't wipe it down right after use. I also give a short blast of steam right after that as well. After about five years we bundled it up and sent it in to the factory for cleaning and reconditioning. It came back as good as new and it's still going strong. About the only real negative aspect to the machine is that it tends to be a bit noisy, but probably no more so than someone using a fully manual pull machine and grinder.

The Jura E8 superautomatic espresso machine utilizes a single aluminum boiler, lined with stainless steel and featuring Thermoblock technology for rapid heating.  We prefer systems with two boilers, which allow you to simultaneously brew coffee and steam milk because single-boiler systems increase your total brewing time for milk-based drinks as the single boiler needs time to switch from one task to the other.

The IMPRESSA J9 is probably the most popular model after the newer Micro 9 due to its breadth of features and overall precision when brewing and crafting a litany of specialty coffee drinks. The concept behind the J9 could not be simpler: simply use the rotary dial to select your desired drink, press the button, and sit back and enjoy. This model is absolutely beautiful and looks like it was pulled right out of an Italian café. The matte sheen and silver hard plastic give the J9 and functional sophistication that will definitely impress you.


Strength and temperature selection for a precise cup – The unit has four selections for the strength of coffee you want and lets you control the brew temperature for different drinks. This is a great way to customize a cup of coffee for guests and family. Instead of a pot evaporating away on the heater all day, just dial in the strength desired and 60 seconds later, you have your perfect cup of coffee.
Don’t you wish there was an easier way to have café-quality coffee without leaving your house? You know the coffee that makes you smile after every sip. Wouldn’t it be great to have a mini café shop, with you being the number one customer, in your kitchen? The Jura Capresso Impressa coffee machine brings delightful made-to-order coffee prepared for perfection without spending $5 every time. Check out the Jura Capresso Impressa S8.
My first Jura was the F7. I bought it off of Ebay(new) and couldn't have been happier. I was so thrilled with it, that I bought another (F9) and gave my mom the F7 because it was such an awesome machine. It is really remarkable how the machine works. It took me a good 15+ cups to figure out how to make the coffee the way I like it. There are so many options on this machine that effect the taste: Grind, water temp, quantity of beans, quantity of water, etc.... In reference to the service I am amazed. When I received my new F9, I immediately had problems with a couple of the buttons. I called the service center and was on hold for 6-8 minutes. After about a 2 minute conversation with the representative they said that she would just send out a new machine and when I get it to send my old machine back in the box. They paid all postage. No credit card, nothing. I've never heard of such a service before. Absolutely Excellent. I couldn't be happier. It is a great machine that makes very good coffee and looks really nice on the kitchen counter. I love my Jura! As a matter of fact, I believe I am going to go and make myself a decaf latte right down.
Like the Sage Express, Panasonic’s NC-ZA1 is a “bean to cup” espresso machine: it takes whole beans, grinds them and pushes hot water through them at pressure to produce a cup of coffee. That’s pretty much where the similarities end, however, because unlike the old-school Express, the NC-ZA1 makes almost the entire process automated – and controllable via touchscreen.
The buttons of the Jura XS90 can be easily programmed for setting volume, strength and temperature of the espresso dispensed. If you take a closer look at the right side of the XS90, you’ll notice that the multi function button is perfect for programming the lattes or cappuccino, including the strength and amount of milk, but also the temperature of espresso dispensed. If you want, then you can even adjust the milk’s foaminess.
Jura offers the ultimate in luxury coffee machines. Designed for those with discerning tastes, this well-known brand offers some of the best coffee makers you can buy – period. From single-serve machines to top-of-the-line super automatic espresso makers, Jura does it all. For the home-brewing enthusiasts, the following three models are the best-of-the-best.
Our final Jura Coffee Maker is technically classified as an espresso maker. As such, it’s only designed for espressos, although you can experiment to make different kinds of beverages if you want. As an espresso machine, this unit is really impressive. If you have used other similar models, you will be impressed by the quality and convenience that the Ena Micro 1 offers.
It’s a lovely looking, all-metal thing, with even accessories like the tamper and milk jug exuding an air of quiet, understated luxury. The portafilter is reassuringly weighty and solid, locking into the group head with a satisfying twist. There are clever little touches you can’t see or immediately feel that add to the feeling of quality too: on top is a tray that warms your cups, and the 2l water tank has an integrated, changeable filter.
Some of the more popular mass market coffee machines are starting to look a little bit dated (not least the hugely popular and bestselling ESAM4200 by Delonghi), but that couldn’t be further from the truth with the Jura Impressa F8. It’s a very stylish and sophisticated looking machine, that wouldn’t look out of place in an upmarket cafe or bar. Jura have managed to pack a lot of controls in to the unit to give near unparalleled control over coffee making, yet retain a fairly minimalist look. There’s something about a black and silver finish that just looks the part, particularly on kitchen appliances that sit on the worktop – you don’t want something ugly to look at as a permanent fixture in the kitchen!
Like other Jura machines, the spouts can be adjusted 2.6-4.4” to accommodate any size cup or beverage. We found the adjustable spout really handy in preventing and splashing or spillover onto the machine which limits clean up and also help create the perfect crema. We found the foam that the C65 produced to be incredibly light with almost a light, feather consistency. While the cost of this unit is slightly higher, our calculations had it paying for itself after only a few months. When we tracked the amount of coffee used and compared it to how much it would have been if purchased from a coffee shop, the Jura paid for itself quicker than you might expect. Not to mention these machines are incredibly well built and will last for years before ever needing to be repaired or serviced. And when that time does come, Jura has always been responsive and communicative which makes sending the unit in painless.
Depending on how often you use your Jura, the machine will prompt you to clean it at regular intervals. For most models this is every 180 cups of coffee. It’s important not to ignore these prompts simply because the longer you wait, the more buildup from the coffee and its oils there will be, and the more the flavor of your coffee will be affected. As with all functions of the Jura, cleaning is extremely simple and is completely hands off.

Jura E8: Innovative technologies in the new JURA E line are revolutionizing the enjoyment of coffee. The One-Touch Cappuccino function on the Jura E8 Black one-touch espresso machine creates trend specialties such as latte macchiato, flat white and cappuccino at the touch of a button. The brewing process for ristretto and espresso has been 100% perfected. The Pulse Extraction Process (P.E.P.©) on the Jura E8 Black one-touch espresso machine is the only process of its kind in the world. It optimizes the extraction time and guarantees the very best aroma even for short specialty coffees.
I purchased this item as a back up to one I already had. The one that I had for about 10 years was starting to leak and I knew that I could not be with out the coffee from the Capresso C1000. It's like having a mini Starbucks in your kitchen. The coffee that this machine make is fabulous. You have minimal choices when it comes to the strength of the coffee and the machine doesn't produce an incredibly hot cup of coffee, which is not a big deal to me because I don't like it that hot. I don't often use it to make anything other than a regular cup of coffee, but occasionally when I make an espresso or cappuccino it does a wonderful job. I would highly recommend this machine for a true coffee lover. It's relatively easy to operate and maintain. You can use ground coffee or beans, but since the machine grinds the beans fresh the coffee is always outstanding when using them.Read full review...

This is where a fully automatic espresso machine comes in handy. Once you have set up the machine and tweaked all the settings, you can’t go wrong anymore. All preparation steps are fully automated, the dosage, the tamping, the grind size, temperature, extraction time, etc… You can expect consistent results, a great espresso shot every time. Maybe that’s why many restaurants decided to go with super automatic machines.
Best of all, thanks to a thermal coffee pot, if you don't polish off the whole pot right away, it will still stay piping hot hours after it was brewed. For $130, the MT600 from Capresso offers all these abilities plus is wrapped up into a snazzy brushed-metal-and-black-plastic frame. Sure, the MT600 won't deliver a truly sublime cup of drip-brewed coffee. For that there's no getting around splurging at least $200 and up for a more capable machine.
We’re going to start with a rundown of the features of the Impressa F8, so that you know what you’re getting if you choose to buy. A lot of machines offer the same core functions, so we tend to focus on what stands out, so rest assured, if we rate a machine highly (as we do with this one), it’s going to be a good all rounder unless we specifically say otherwise.
When looking for a fully automatic espresso machine, you have the choice to go for either a dual heating system or a single heating system machine. For instance, if you go for a dual boiler machine, then when you’re going to start the steam model, you’ll need to wait for about ten seconds until steam is available. With a single element system, the wait time increases by a factor of 5 and it takes about fifty seconds to get steam.
Because this Capresso grinder uses the same high-quality, low RPM conical burr grinder design as the 565, this machine preserves the subtlest aromatics of your coffee beans. It produces a consistent, uniform, and delicious grind in 16 settings, suitable for almost any brew types. Its large hopper is convenient, and will store several days worth of beans at a time.
We found the Jura J9 to be intuitive to navigate and the state of the art TFT display which features text and images, combined with the rotary selector makes choosing your beverage simple. A standout feature of this model if the “fine foam” technology which utilizes three bars in the frother spout which acts to slow down the foam as it exits the frother so its poured at the right speed and evenly into the cup. The stainless steel vacuum milk container that feeds the frother warms the milk or cream and is easy to clean. The hardened steel grinding heads of the built-in canonical grinder deliver precision ground coffee every single time. There isn’t a single thing the IMPRESSA J9 doesn’t do well and it probably the most well-rounded model on our list.

The Jura XS90 features easy-to-use controls for setting temperature, volume, and strength of the coffee or espresso dispensed. There’s a large bean hopper with an integrated bean sensor that will remind users to refill the bean container. There’s also a water level sensor that makes sure there’s water in the removable water tank. Priced at around $2,000, this unit is probably the cheapest Jura with a one-touch capability.
09/16/2010 - The C1000 finally gave out after 10+ years and service fees of $250. With all lights now flashing and the loudest grinding noise ever, it was confirmed today with Jura-Capresso Customer Service that this unit is not worth their new $250 service fee to repair (if it could be repaired). I still found the C1000 a great appliance and Jura-Capresso a very reputable company. From a cost-analysis perspective (and these are ONLY estimates), I consume about 700 cups per year which requires about 20 pounds of beans at $10 per pound (Fresh Market) or $200 per year. Ten years worth of coffee beans cost about $2,000. Add the $900 cost of the C1000, plus two $125 service fees, my total investment was around $3,150. I excluded the cost of water since we pay a minimal fee, but never use the charged amount. Equivalent cups of pressure brewed coffee (about $3 per cup from Starbucks) over this ten year period would cost about $21,000. I compare Starbucks prices since there is a huge quality difference between their pressure-brewed coffee and drip coffee at your local food mart. So my break-even point with the Jura-Capresso C1000 was between one and two years. The remaining eight to nine years of coffee I consumed was at no cost (when compared to Starbucks). This analysis only includes the direct financial cost and not the cost of your time/fuel getting to Starbucks. I happily accepted Jura-Capresso’s "one-time replacement offer" to upgrade my C1000 to a new IMPRESSA C5. The list price is $999, but the upgrade cost is only $600. Although my C1000 unit has experienced problems, it continues to be the most awesome coffee machine ever! Once my IMPRESSA C5 machine arrives and has been used a short time, I will post a new product review.Read full review...

There are other factors to consider, such as color and material, but most Jura machines come with customizable aesthetics. We will cover more in-depth things to know in the next couple of sections, but for now, hold on to this list of general thoughts as we begin to browse the different Jura lines and examine what each different type of machine has to offer.
×