While we can sing the praises of the E6 all day, the fact is that there is a bit of a learning curve with it. The instruction manual can be a little confusing to some people, and setting up your cleaning system can take a while. Also, plan on spending more time with maintenance than you would with other coffee makers. In the end, it ensures that your machine is always ready to go, but it can be a bit of a time investment.
Using the machine the first time was fun - it has lights that shine down on the cup for a very cool look. It is much quieter than our DeLonghi, and very fast to heat up and grind, brew, and dispense the coffee. The crema is very nice, and the coffee tastes great. The drip tray is easy to pull out to the front, and easy to rinse and throw away the grinds. The machine is plastic, which is ok, but the tray where the cup rests is polished silver metal, and has a nice heaviness to it. The J9.3 comes with a Jura milk container and tubes. We don't do a lot of milk drinks, so I didn't mind that you have to do just a bit extra to fill up the container and attach the hose. You could just put a hose into a cup of milk; you don't have to use the Jura container. It made a very nice latte, great foam. It was actually easy to clean and rinse, but you do have to take the time to be there with two cups - one with rinse water and another to catch the dirty water, then repeat. If you don't mind taking a couple extra steps and minutes, then it's easy. The J9.3 came with the Jura milk container.
The large water tank and grounds container allow you to produce large quantities of coffee at a time, making this system ideal for office settings or large gatherings. Two thermo-block heating systems ensure temperature control, while a precision burr grinder with 6 settings allows you ultimate control over your the coarseness of your coffee grounds.
There is a learning curve and one has to get the coffee to water ratio correct for one's preferences...changing it for other drinkers. But it is truly automatic, which is nice for serving more than one person quickly, brews quickly and makes very good coffee. Jura took this machine and rewired it per the wiring recall on this model, returned it, all at no cost to me.
Instead of an LCD screen, this model uses a standard LED to show you what kind of coffee you’re making. It’s not quite as involved, but it’s helpful and better than a manual version. With the ENA 9, you can make six different kinds of coffee. It uses two nozzles to layer your beverages perfectly with foam or milk. The frother is a separate unit that connects to the base machine.
Just by the water canister (which holds just under two litres), there’s a replaceable water filter that cleans the water as the machine begins each cycle. Depending where you live, this may carry a different weight of importance, but if you’re in an area where water has a strong taste, this may well be a big plus towards buying the Jura Impressa F8 over other machines. Water is such a big part of making coffee, it will go a long way towards giving consistent results day after day!
Jura E8: Innovative technologies in the new JURA E line are revolutionizing the enjoyment of coffee. The One-Touch Cappuccino function on the Jura E8 Black one-touch espresso machine creates trend specialties such as latte macchiato, flat white and cappuccino at the touch of a button. The brewing process for ristretto and espresso has been 100% perfected. The Pulse Extraction Process (P.E.P.©) on the Jura E8 Black one-touch espresso machine is the only process of its kind in the world. It optimizes the extraction time and guarantees the very best aroma even for short specialty coffees.
It’s affordable (£70 at Argos at the time of writing; Dolce Gusto pods are priced at around £4 for a box of 16) and incredibly simple to set up and use. Simply fill the removable water tank with cold H2O, pop your chosen coffee pod into a slide-out drawer at the front, stick a cup under the spout and hit the power button. When it turns from red to green (a mere few seconds) the machine is ready. You then push the water lever either left (for cold drinks) or right (for hot drinks) until the desired amount of your drink is in the cup. Then slide out the drawer, expel the pod and throw it away.
It comes pre-loaded with default recipes for latte macchiato, cappuccino, an espresso shot, a ristretto shot, coffee, coffees, hot water, and steamed milk. All of the recipes can be customized via "Expert Mode". You can adjust the strength (1 - 5 beans), volume in ounces or mL's), steamed milk amount (based on time in seconds). You can also adjust all of the parameters while making the drink without saving, which is great for guests. Basic operation is very simple and straightforward. The TFT display makes this super user friendly. Anyone can easily scroll thru using the wheel on top of the machine and pick whatever type of drink they want. Or, you can select most drinks directly from the TFT screen as well. For two shots or two cups of coffee, hit the button twice. You can also enter the recipe modification mode by holding the drink selection button as well. Grind adjustment is via a knob under the back right top cover. It also displays graphics of your drink while it's being made.
If you’re a froth fan, you won’t be disappointed – Jura machines tend to be very good frothers (if that’s a word) and manage to top off drinks to the same standard as you’ll usually find in the high street coffee shops. It’s certainly an impressive result, even if we found it was a novelty the wore off rather quickly. We’re not the biggest advocates of milk foaming though, so you might be more excited that we are!
This super-automatic Jura Capresso ENA 5 coffee machine does produce a tasty cup of coffee, no doubt about it. But we are concerned about its ability to hold up under pressure (literally, with flying milk nozzles!). For the kind of cash that this machine requires, most customers would likely be happier with another Jura model (the S9, perhaps) or another brand of super-automatic coffee machine.