We’re going to start with a rundown of the features of the Impressa F8, so that you know what you’re getting if you choose to buy. A lot of machines offer the same core functions, so we tend to focus on what stands out, so rest assured, if we rate a machine highly (as we do with this one), it’s going to be a good all rounder unless we specifically say otherwise.

The Capresso EC-100 comes with a generous number of safety features, which you find in the best home espresso machines. These include a short electrical cord so that nothing is dangling down within reach of a youngster's eager hands, which could pose serious risks to a child. The polarized plug means your espresso maker can only be plugged in one way. Since this model is equipped with on and off indicator lights, it's easy to tell that your machine is off when you want it to be and not worry about accidents, burns or fire.

I only have one minor quibble with this machine; if you like cappuccino, it produces foam that is weak and deflates easily. I have troubleshot this problem from every possible angle (tried different percent milkfat, different milks(soy), different milk temps etc.) and the results were still a little disappointing. I purchased the Milk Frothing accessory designed for this unit and still could not produce the more velvety foam I was seeking. The easiest fix for this is to buy an Aerolatte: steam your milk with the F9 (the steam function works great) and then whip till your hearts content with the Aerolatte. For an extra $15 bucks spent on the Aerolatte, you'll have the perfect cup of cappuccino to rival any cafe.
Most modern coffee machines will feature a foam frother and this is also a vital part of a coffee machine like the Jura C65. The majority of users actually require this feature in order to make tasty lattes and cappuccinos. The good news is that the Jura C65 does indeed feature a revolutionary fine foam technology that ensures the milk has lots of foam. On top of that, the coffee spout’s height is adjustable, so you can easily fit a wide range of cups ranging from sixty five millimeters and up to one hundred and eleven millimeters.
This is probably one of the more important points to note – just how easy it is to get started. Bean to cup coffee machines tend to fall into two categories, they are either easy to use but inflexible, or take time to master and give a lot of opportunity to experiment. This Jura machine gives a lot of scope to both, which is great if you’re short on practice time or not sure if you’ve got the skills needed just yet.

The buttons of the Jura XS90 can be easily programmed for setting volume, strength and temperature of the espresso dispensed. If you take a closer look at the right side of the XS90, you’ll notice that the multi function button is perfect for programming the lattes or cappuccino, including the strength and amount of milk, but also the temperature of espresso dispensed. If you want, then you can even adjust the milk’s foaminess.

09/16/2010 - The C1000 finally gave out after 10+ years and service fees of $250. With all lights now flashing and the loudest grinding noise ever, it was confirmed today with Jura-Capresso Customer Service that this unit is not worth their new $250 service fee to repair (if it could be repaired). I still found the C1000 a great appliance and Jura-Capresso a very reputable company. From a cost-analysis perspective (and these are ONLY estimates), I consume about 700 cups per year which requires about 20 pounds of beans at $10 per pound (Fresh Market) or $200 per year. Ten years worth of coffee beans cost about $2,000. Add the $900 cost of the C1000, plus two $125 service fees, my total investment was around $3,150. I excluded the cost of water since we pay a minimal fee, but never use the charged amount. Equivalent cups of pressure brewed coffee (about $3 per cup from Starbucks) over this ten year period would cost about $21,000. I compare Starbucks prices since there is a huge quality difference between their pressure-brewed coffee and drip coffee at your local food mart. So my break-even point with the Jura-Capresso C1000 was between one and two years. The remaining eight to nine years of coffee I consumed was at no cost (when compared to Starbucks). This analysis only includes the direct financial cost and not the cost of your time/fuel getting to Starbucks. I happily accepted Jura-Capresso’s "one-time replacement offer" to upgrade my C1000 to a new IMPRESSA C5. The list price is $999, but the upgrade cost is only $600. Although my C1000 unit has experienced problems, it continues to be the most awesome coffee machine ever! Once my IMPRESSA C5 machine arrives and has been used a short time, I will post a new product review.Read full review...
If you’re a froth fan, you won’t be disappointed – Jura machines tend to be very good frothers (if that’s a word) and manage to top off drinks to the same standard as you’ll usually find in the high street coffee shops. It’s certainly an impressive result, even if we found it was a novelty the wore off rather quickly. We’re not the biggest advocates of milk foaming though, so you might be more excited that we are!