Six years and 7540 shots of espresso. The only downside of this machine is that it is too easy to use so that you end up drinking more cups than you might otherwise. It's very fast to heat up, both for the main heating block, as well as for steam. The steamer wand takes some practice to get good, tight foam, but once you figure out the technique it's not difficult. The openings in the wand can clog up if you don't wipe it down right after use. I also give a short blast of steam right after that as well. After about five years we bundled it up and sent it in to the factory for cleaning and reconditioning. It came back as good as new and it's still going strong. About the only real negative aspect to the machine is that it tends to be a bit noisy, but probably no more so than someone using a fully manual pull machine and grinder.

4) The coffee and espresso are great. I've learned to make a latte just like Starbuck's and I haven't been back since. Some people complain that the frother doesn't work well, but here's the trick: first, you should use non-fat or low-fat milk. For some reason, lower fat milk froths better every time; second, be sure to clean the frothing nozzle after each use. Kind of a no-brainer, I know. Third, there are two settings on the frother, and you can change the setting by sliding the sleeve on the frothing tip up or down. Experiment with this and you will get the perfect froth, really.
Last but not least, this machine features 5 level water hardness selectors and makes it a breeze to set it to your specific water hardness. On top of that, it can also count the number of coffee cups you’ve consumed, how many times the machine was cleaned, how often the steam function was used and so on. If you want, you can keep stats on a daily basis.
This is probably one of the more important points to note – just how easy it is to get started. Bean to cup coffee machines tend to fall into two categories, they are either easy to use but inflexible, or take time to master and give a lot of opportunity to experiment. This Jura machine gives a lot of scope to both, which is great if you’re short on practice time or not sure if you’ve got the skills needed just yet.
The Jura Capresso Impressa J5 will allow anyone who owns ones to quickly prepare coffee house drinks in the comfort of their home at their convenience. The customization possibilities with this espresso machine assure that everyone can have their favorite drink exactly as they like it. The shorter flow of coffee ensures that the coffee will be hot with more crème in the cup.
If you are going to try to make other coffees with this machine, plan on doing some trial runs to get it right. Since you can adjust the amount of water and beans, you can make standard coffee if you want, but it’s not going to be as good as the espresso. Overall, we only recommend this to espresso drinkers, but it’s nice to know that you can make other beverages if and when you want a change.
The speed at which the Jura ENA Micro 9 delivers coffee is amazing. Before you know it, the chrome accented spouts are delivering hot espresso that absolutely tastes as if it was prepared by skilled human hands. The design and casing look great up close and feature a hard plastic with a matte silver finish. The top of the unit is a shiny black that’s reminiscent of Lucite and is easy to quickly wipe down and keep the machine looking fresh. We were also impressed with the density of the foam that the Micro 9 delivers. We considerer ourselves experts in the area of good foam and we were not disappointed with its dense and thick mouth feel. The adjustable spout creates clearance for any size mug or large cup and the multi-level sealed conical grinder performs just as well as any standalone grinder we’ve ever owned. Overall, ENA Micro 9 strikes that perfect balance between size, power and delicious coffee. This is currently our favorite model and the one we have in our own home.
Alright, for the person whose coffee/espresso interest borders on obsession (or strong passion if you will) the F7 probably won’t satisfy. Mainly because of the built-in grinder. For someone who’s aiming for perfection in their brew, a precision standalone grinder and a standalone coffee maker is going to be what they need to look for to really dial in their perfection.
The ESAM5500B from DeLonghi allows you to finally be your own barista and enjoy delicious lattes and cappuccinos anytime. This model comes with a patented milk container, so if you love Italian drinks and would like to prepare them at home, then the ESAM5500B can easily help you prepare them. All you need to do is slide it onto the front of the espresso machine, place your favorite cup under the nozzle and then press the button corresponding to the type of drink you want to prepare. After that, the machine is going to take care of everything for you. Given the fact that it can be detached easily, you can place the milk container in the refrigerator after each use.
The ultra-modern frother technology prepares milk foam of unprecedented quality. The foam is both fine and compact, giving it a creamy consistency with a subtle sweetness. The frothers have two separate chambers in which the milk is frothed twice. Any bubbles that form will burst, compacting the foam and making it extremely fine. Three bars in the frother spout slow down the foam as it exits the frother, so it is poured slowly and evenly into the cup.

I have tried several semi-automatic espresso machines and have returned 4 before I found this one you have to spend the money. It makes great coffee but the froth just can't steam 8oz of milk for a latte and put out a quality Latte. So I purchased the Jura froth PRO Automatic Milk Frother and it makes a great Latte. Coffee is excellent and iced lattes are quick and easy to make and I have saved $$ through the years. I would purchase one again it pays for itself if you drink lattes and iced drinks at Starbucks within 3 months. I have owned this machine since Dec. 2008 and happy with the purchase.
Because this Capresso grinder uses the same high-quality, low RPM conical burr grinder design as the 565, this machine preserves the subtlest aromatics of your coffee beans. It produces a consistent, uniform, and delicious grind in 16 settings, suitable for almost any brew types. Its large hopper is convenient, and will store several days worth of beans at a time.
Anyone who is looking for the perfect espresso machine, should certainly take a closer look at the Cuisinart EM-600. This model is able to brew excellent traditional coffee beverages and espresso shots at the touch of a button and without you having to worry about moving the cup. The EM-600 incorporates a removable milk tank (22 oz) which sends frothy, creamy and hot milk right into your cup for barista quality, hands free latte and cappuccino. If you want to use it with the Illy Espresso capsule system, you’ll be very happy to know that this model offers innovative froth controls, flavor strength and temperature control with the push of a button.
Turn, press, enjoy - that's how easy it is to enter the world of impressa; with the one-switch operating concept of the rotary switch and the 11-language plain text display, it's easy to create the perfect Coffee every time. Thanks to the high-performance conical grinder, the beans are always freshly ground. The simple, compact design with its elegant Platinum finish gives the impressa C65 an imposing yet understated look in any surroundings.
The Jura Capresso Impressa J5 will allow anyone who owns ones to quickly prepare coffee house drinks in the comfort of their home at their convenience. The customization possibilities with this espresso machine assure that everyone can have their favorite drink exactly as they like it. The shorter flow of coffee ensures that the coffee will be hot with more crème in the cup.
Just by the water canister (which holds just under two litres), there’s a replaceable water filter that cleans the water as the machine begins each cycle. Depending where you live, this may carry a different weight of importance, but if you’re in an area where water has a strong taste, this may well be a big plus towards buying the Jura Impressa F8 over other machines. Water is such a big part of making coffee, it will go a long way towards giving consistent results day after day!
Aside from the flexibility of using either the supplied gold filter or store-bought paper ones, the Capresso MT600 sports other thoughtful extras. For instance, the right side of the water tower not only features a graduated water indicator which is a staple for these type of products, but its tank fluid gauge boasts a floating red bead that makes it a cinch to see exactly where the water line is in relation to its 10 cup capacity. Frankly, it's a trick I wish other coffee makers employed.
To make it easy for you, we’ve gathered up the best espresso machines on the market, carefully weighed, and prioritized several criteria in testing and put together these targeted espresso machine reviews that are specifically meant to help you cut through all the confusion and just get the best deal on the home espresso maker that fits your style.
09/16/2010 - The C1000 finally gave out after 10+ years and service fees of $250. With all lights now flashing and the loudest grinding noise ever, it was confirmed today with Jura-Capresso Customer Service that this unit is not worth their new $250 service fee to repair (if it could be repaired). I still found the C1000 a great appliance and Jura-Capresso a very reputable company. From a cost-analysis perspective (and these are ONLY estimates), I consume about 700 cups per year which requires about 20 pounds of beans at $10 per pound (Fresh Market) or $200 per year. Ten years worth of coffee beans cost about $2,000. Add the $900 cost of the C1000, plus two $125 service fees, my total investment was around $3,150. I excluded the cost of water since we pay a minimal fee, but never use the charged amount. Equivalent cups of pressure brewed coffee (about $3 per cup from Starbucks) over this ten year period would cost about $21,000. I compare Starbucks prices since there is a huge quality difference between their pressure-brewed coffee and drip coffee at your local food mart. So my break-even point with the Jura-Capresso C1000 was between one and two years. The remaining eight to nine years of coffee I consumed was at no cost (when compared to Starbucks). This analysis only includes the direct financial cost and not the cost of your time/fuel getting to Starbucks. I happily accepted Jura-Capresso’s "one-time replacement offer" to upgrade my C1000 to a new IMPRESSA C5. The list price is $999, but the upgrade cost is only $600. Although my C1000 unit has experienced problems, it continues to be the most awesome coffee machine ever! Once my IMPRESSA C5 machine arrives and has been used a short time, I will post a new product review.Read full review...
Jura Capresso was born in 1994 as a company that aimed to deliver high-end European style coffeemakers to the American market. Eight years later, it entered into a joint venture agreement with Jura AG, a Swiss developer and distributor of automatic coffee centers that is present in more than 50 countries. By 2008, Jura AG had become the sole owner of all Jura Capresso operations.
What sets the Jura line of coffee machines apart for other similar coffee systems is that it does literally everything you need to do with the touch of a button. When preparing the machine, you simply load it with coffee and water, and if it’s your preference, milk or cream. We were originally concerned about cleaning dairy products out of the Jura as this can be a pain point with other systems. You don’t want dairy leftover in any part of the machine as it turns quickly and can easily ruin upcoming batches of coffee. But with the Jura, you load the milk into an easy to remove and clean stainless steel canister making the clean up super simple.

So I'm at my local Goodwill store and I was just getting ready to leave when one of the employees brought a cart out of the back with the Jura Capresso F9 sitting on it... I had drooled over their products online for quite a while now but sadly could not afford to drop 1900.00 (what they cost new) on an espresso machine. When I saw the F9 sitting on the cart I quickly grabbed it but noticed a tag on it that said "AS IS NO RETURN" and the price tag below reading $49.99. I was willing to take a chance & at $49.99 I figured I could always sell it for parts on an online auction and get my money back or even make a tiny profit if it didn't work. I got home and downloaded a manual plugged it in, programmed it, installed the filter (there were 4 new filters with it & that alone is worth the $49.99) added espresso beans & guess what it worked perfectly! I have since used it daily, mornings I have a quadruple espresso and evenings I have a latte with 2 shots... It's easy to clean & maintain and having paid only $49.99 I felt like I won the lottery ..


Like the Sage Express, Panasonic’s NC-ZA1 is a “bean to cup” espresso machine: it takes whole beans, grinds them and pushes hot water through them at pressure to produce a cup of coffee. That’s pretty much where the similarities end, however, because unlike the old-school Express, the NC-ZA1 makes almost the entire process automated – and controllable via touchscreen.
You don’t really need to be a coffee connoisseur to be able to prepare your own drinks with this coffee machine. There are recipes for 12 coffee creations which you can select with the rotary switch. The machine uses images and texts to guide users through the preparation stages. You can prepare coffee choices such as Irish coffee, flavored latte macchiato, Viennese coffee, and Café Melange, amongst others. In addition, this coffee machine is also self cleaning to eliminate any excuses when it comes to making speciality coffee at home.
The ENO Micro is one of the latest offerings from Jura that signals their move toward more compact units that consume less real estate in the kitchen. In fact, this particular unit is actually shorter than the older compact ENA line by a few inches. We love its small size and low profile, and find that its unassuming presence adds to the impact when the coffee start being made. Some users actually prefer the larger Jura units, but we prefer the Micro 9’s size and simplicity. The Jura ENA Micro 9 is the world’s smallest one-touch cappuccino maker but that certainly does not mean that they skimped on features or design elements.
This super-automatic Jura Capresso ENA 5 coffee machine does produce a tasty cup of coffee, no doubt about it. But we are concerned about its ability to hold up under pressure (literally, with flying milk nozzles!). For the kind of cash that this machine requires, most customers would likely be happier with another Jura model (the S9, perhaps) or another brand of super-automatic coffee machine.
This hefty Capresso burr grinder is built with a heavy-duty zinc die-cast housing, making it sturdy and reliable. Its large 8-ounce hopper ensures that you won’t be refilling your coffee beans for days. Its burr grinding mechanism produces consistent, uniform grinds in 16 different texture settings, from Turkish at the finest to French press at the coarsest. Because the Capresso 565 has a low RPM, low-heat grinder design, it causes minimal degradation to your coffee beans. 
*Disclaimer: Our Jura Capresso 560 Infinity Burr Grinder Review is based mostly on our expertise and the experts we consulted with and the information provided by the manufacturers. We do test many products, but it’s not possible to test them all. As such, please remember the above recommendations are our opinions, and before using any product, please check manufacturer’s website for more information.
After extensive researching of current high(er) end coffee machines, I purchased the Jura C65 to replace my Jura F7 - which had finally failed after 11 years of reliable service. Set-up was fast and easy -- instruction booklet is well organized with useful diagrams. Am completing the 1st week of daily use: so far so good. The C65 produces excellent coffee. Controls are less complicated than my old F7, and it is easy to adjust to fit individual tastes -- strength, cup size, temperature, etc. Only fret is reliability -- will it match the duration of the F7?
09/16/2010 - The C1000 finally gave out after 10+ years and service fees of $250. With all lights now flashing and the loudest grinding noise ever, it was confirmed today with Jura-Capresso Customer Service that this unit is not worth their new $250 service fee to repair (if it could be repaired). I still found the C1000 a great appliance and Jura-Capresso a very reputable company. From a cost-analysis perspective (and these are ONLY estimates), I consume about 700 cups per year which requires about 20 pounds of beans at $10 per pound (Fresh Market) or $200 per year. Ten years worth of coffee beans cost about $2,000. Add the $900 cost of the C1000, plus two $125 service fees, my total investment was around $3,150. I excluded the cost of water since we pay a minimal fee, but never use the charged amount. Equivalent cups of pressure brewed coffee (about $3 per cup from Starbucks) over this ten year period would cost about $21,000. I compare Starbucks prices since there is a huge quality difference between their pressure-brewed coffee and drip coffee at your local food mart. So my break-even point with the Jura-Capresso C1000 was between one and two years. The remaining eight to nine years of coffee I consumed was at no cost (when compared to Starbucks). This analysis only includes the direct financial cost and not the cost of your time/fuel getting to Starbucks. I happily accepted Jura-Capresso’s "one-time replacement offer" to upgrade my C1000 to a new IMPRESSA C5. The list price is $999, but the upgrade cost is only $600. Although my C1000 unit has experienced problems, it continues to be the most awesome coffee machine ever! Once my IMPRESSA C5 machine arrives and has been used a short time, I will post a new product review.Read full review...
THE CURE: Once weekly reach up inside with a hot, wet towel, and clean the round disk behind the flap that hangs down. If it jams, unplug and let it cool before turning it on - sometimes you may have to do this several times. It just happened this a.m., and I had to wait 1/2 hour between my 3rd and 4th cup :) The first time it happened, tech support walked me through the cleaning on the phone. The last time was more of a problem, and they shipped me a mailing label for a $245 complete rebuild, but I didn't have to use it.
To enable the filter and coffee machine to communicate, JURA uses modern RFID technology. Any machine fitted with the intelligent water system (I.W.S.®) recognises when a filter is inserted, automatically switches to filter mode and starts the rinsing process. When the filter capacity is nearly used up the machine prompts the user to change the filter. If the filter is not changed, the machine activates descaling mode. After a certain amount of use, the user is prompted to descale the machine. This can only be done when the filter is removed, so there is no more risk of user error resulting from misunderstandings.
×