The Impressa’s control panel is based around a central colour display that’s used to guide you though the process, which helps to turn a maze of functions into an intuitive set of menus (or a carousel as Jura call it). The control of the menus is achieved by a ‘rotary switch’ located on top of the machine at the front, neatly sandwiched between the power and program buttons. The buttons either side of the screen vary in purpose, depending what’s on the screen at the time. in general though, the screen splits into four zones, with each button used to select the corresponding zone.
Save a lot of money – If you calculate how much money you are spending on a monthly basis on regular visits to coffee shops, the amount would be very high. Also, this may or may not increase every month. You can make a variety of coffee drinks at home with just one espresso machine. Buying Jura coffee machine is a one-time investment. It will help you save a lot of money in coffee shops.  

From the outside, the Giga 5 looks attractive. It has a color TFT (thin film transistor) LCD screen display on the top front and center, with a stylish aluminum chassis with black plastic sides. This unit will definitely enhance the look of any kitchen. There’s a dedicated hot water spout at the front of the machine plus a couple of adjustable spouts for making coffee. Located on top of the unit you will find on/off buttons, a program button, and a rotary switch that is key to navigating the Giga’s menu.
Better yet, you can also customize the volume, strength and also coffee aroma in order to ensure that you prepare the ideal drink you and your friends are going to love. Other than that, the grinder uses Gaggia’s Adapting System for adjusting the RPMs which helps dispense the right amount of coffee grounds, while the wide range of coffee drinks you can make with the Brera qualify it as the best and most affordable super automatic espresso machine for coffee lovers on a budget.
While we can sing the praises of the E6 all day, the fact is that there is a bit of a learning curve with it. The instruction manual can be a little confusing to some people, and setting up your cleaning system can take a while. Also, plan on spending more time with maintenance than you would with other coffee makers. In the end, it ensures that your machine is always ready to go, but it can be a bit of a time investment.

The ENA Micro 1 is the simplest of all of Jura’s machines. It is the smallest machine on the list, the most affordable, and packed with the base technologies in Jura’s machines. Your beverage begins by grinding whole coffee beans in a multi-level grinder, which are then pushed through a micro brewing unit. The machine delivers a rich espresso, with a soft layer of crema on top.
The Impressa’s control panel is based around a central colour display that’s used to guide you though the process, which helps to turn a maze of functions into an intuitive set of menus (or a carousel as Jura call it). The control of the menus is achieved by a ‘rotary switch’ located on top of the machine at the front, neatly sandwiched between the power and program buttons. The buttons either side of the screen vary in purpose, depending what’s on the screen at the time. in general though, the screen splits into four zones, with each button used to select the corresponding zone.

If you’ve been using espresso machines for quite a while now, then you are probably fully aware of what makes a good espresso machine. Running a fifteen-bar pressure into the grounds, the Jura C65 can easily extract the right flavor from your coffee beans. Better yet, you can use its wide range of programmable options in order to adjust the brewing temperatures with two levels to boot, coffee strength (in four levels) and also the amount of water used.
The Impressa Z6 employs Jura’s innovative Pulse Extraction Process brewing system. As opposed to a constant flow, water is instead pulsed through the grounds in short intervals that extract greater intensity and aroma while shortening the overall brew time. With P.E.P., espresso and ristretto can be prepared with greater clarity and flavor than ever before.
2) Overall, I have to say I absolutely LOVE this machine. Here's how I rationalized payment for such an expensive indulgence: if you figure a Starbucks costs approx. $3, and you buy one everyday (which I was), it would take 600 cups to break even. Well, with the automatic counter on my machine, I have made more than 1600 cups! This machine paid for itself in the first year..easily. ok, so now that you're past the issue of paying so much for a coffee machine, here's more...
Not trouble free, as they all seem to jam periodically, but easily fixed. Per J-C, the problem is using very oily beans, which we do as we love very dark, heavily roasted Starbucks beans. The part that jams is the press mechanism. When it expresses the puck, it clogs and won't go back up. This seems to be a criticism for many of its machines, but it's hardly a deal breaker.
Also, we went through a brief episode in which it would refuse to brew anything (as if it didn't have the power to punch the water through the puck of coffee). I remedied this with a descaling cycle as well as wiping out the parts above the removable tray thoroughly. (I use filtered water in the machine, but the descaling seems to be a more serious cleaning than the normal automatic cleaning.)
The Jura A9 truly shines in the milk drinks department. It features 2 height adjustable spouts that go anywhere from two point two and up to five point four inches if you plan on using taller However, when it comes to the milk, the machine uses a pick-up tube system. What this means is that now you can just place the tube into the milk container and prepare delicious milk based drinks. For better results though, it’s best that you either get Jura’s cool control milk cooler or their optional thermal milk container. That’s because not only is it better to keep milk chilled for sanitary reasons, but chilled milk also produces better froth.
×