Some of the more popular mass market coffee machines are starting to look a little bit dated (not least the hugely popular and bestselling ESAM4200 by Delonghi), but that couldn’t be further from the truth with the Jura Impressa F8. It’s a very stylish and sophisticated looking machine, that wouldn’t look out of place in an upmarket cafe or bar. Jura have managed to pack a lot of controls in to the unit to give near unparalleled control over coffee making, yet retain a fairly minimalist look. There’s something about a black and silver finish that just looks the part, particularly on kitchen appliances that sit on the worktop – you don’t want something ugly to look at as a permanent fixture in the kitchen!
Best of all, thanks to a thermal coffee pot, if you don't polish off the whole pot right away, it will still stay piping hot hours after it was brewed. For $130, the MT600 from Capresso offers all these abilities plus is wrapped up into a snazzy brushed-metal-and-black-plastic frame. Sure, the MT600 won't deliver a truly sublime cup of drip-brewed coffee. For that there's no getting around splurging at least $200 and up for a more capable machine.
The improvements are quite a few, including the four selectable strength options that helps determine the dosage of the shots you want to brew between five and sixteen grams of coffee. If you want, you can easily tailor your experience with programmable pre-brewing, brew temperature and water volume. You can make the adjustments by using the rotary switch and the good news is that the machine will remember your preferences so you can brew the same delicious cup of coffee next time.
I received my machine on Jan 20th. I have to say it was a huge let down. Niether the coffee or milk were hot enough. I would think spending this amount of money on a coffee machine you should at least get hot coffee and milk without having to use cupwarmer or running hot water through it. I will say that amazon was a pure joy to work with on the return. They made everything simple and easy with no fuss. Thank you amazon for that.
Thinking that I must have received a defective unit, I requested an exchange from Amazon. I had a replacement unit the next day!! Amazon is amazing in this regard. The second unit worked well for the first week and then the same issue with the espresso not coming out and having to press the button to refill the pump started occurring again. More wasted espresso!!
Six years and 7540 shots of espresso. The only downside of this machine is that it is too easy to use so that you end up drinking more cups than you might otherwise. It's very fast to heat up, both for the main heating block, as well as for steam. The steamer wand takes some practice to get good, tight foam, but once you figure out the technique it's not difficult. The openings in the wand can clog up if you don't wipe it down right after use. I also give a short blast of steam right after that as well. After about five years we bundled it up and sent it in to the factory for cleaning and reconditioning. It came back as good as new and it's still going strong. About the only real negative aspect to the machine is that it tends to be a bit noisy, but probably no more so than someone using a fully manual pull machine and grinder.
Jura machines all have self-cleaning technologies that prevent scaling, powder buildup, and other problems typical of the industry. That being said, you will need to become familiar with and regularly purchase self-cleaning fluids and tablets that the machine uses to maintain itself. These products are typically included on the page where you buy, but in the event that they are not, we have you covered in our reviews.
The other thing to keep in mind is that the milk frother can be a little finicky. We discussed the fact that most frothers don’t (or can’t) heat the milk to the same level as the coffee, and this machine is no different. Also, cleaning the spout can be a little tricky. Overall, when buying the E6, just plan on spending some time to get to know it. Once you’ve mastered all of the little things, it will become second nature.
This machine is awesome. Works great. Very easy to use, and VERY easy to maintain. That last part is key. Our previous machine, Capressa, was a pain to keep clean. This is far easier. Had it for about 6 months now and I've no complaints. The cleaning tablets (ordered on Amazon) are a bit pricey, but I have to imagine far less the sending the machine in for repair (which we did on our Capressa machine) Other than the coffee, cleanliness and overall use of the machine, the maintenance aspect is pretty easy. Put a tablet in the grinder and push the button. Done.
As previously mentioned, this grinder is a bit less sturdy than its new revision, the 565. The 560 has the same issues with its mechanical timer, with the grind mechanism starting before you have had a chance to set the time. This results in a somewhat inconsistent grind quantity. The hopper lid is also not completely airtight, so it isn’t recommended that you keep your beans in it for more than a few days. The same issue with static buildup is also present, and may lead to a messy countertop.
If you’re a froth fan, you won’t be disappointed – Jura machines tend to be very good frothers (if that’s a word) and manage to top off drinks to the same standard as you’ll usually find in the high street coffee shops. It’s certainly an impressive result, even if we found it was a novelty the wore off rather quickly. We’re not the biggest advocates of milk foaming though, so you might be more excited that we are!