This machine can invade your dreams with all its capabilities. One of the coolest is its ability to automatically fully clean itself but don’t forget about the straight forward programming, which is so simple the only time you’ll need the manual is to figure out what buttons to hold down. Last but not lease, the capabilities of customizing your drink is even above the ESAM3500, which is impressive
I have had a Capresso C3000 super automatic for many years that I was starting to have some minor problems with (small water leak, tray sensors corroding) and decided it was time to get a replacement. I work from home and tend to drink coffee most of the day so I'm looking for something that works reliably and for a very extend period of time. I started looking at the new super automatics from the Jura Capresso based on the longevity of the old C3000. I will admit, it's the TFT display that really caught my eye on this one. I started looking thinking that I'd end up with a Z series, but the TFT display was what veered me over to this one.
This is probably one of the more important points to note – just how easy it is to get started. Bean to cup coffee machines tend to fall into two categories, they are either easy to use but inflexible, or take time to master and give a lot of opportunity to experiment. This Jura machine gives a lot of scope to both, which is great if you’re short on practice time or not sure if you’ve got the skills needed just yet.
For those really into their coffee drinks, and I mean obsessively so, a separate grinder is an absolute must. That loud noise you hear in the coffee shop every time you go in? That’s the grinder. Now, after saying that, let me tell you the grinder in the F7 is quiet and fast. So don’t worry about your kitchen ending up sounding like a coffee shop’s barista station.
To enable the filter and coffee machine to communicate, JURA uses modern RFID technology. Any machine fitted with the intelligent water system (I.W.S.®) recognises when a filter is inserted, automatically switches to filter mode and starts the rinsing process. When the filter capacity is nearly used up the machine prompts the user to change the filter. If the filter is not changed, the machine activates descaling mode. After a certain amount of use, the user is prompted to descale the machine. This can only be done when the filter is removed, so there is no more risk of user error resulting from misunderstandings.
If you are going to try to make other coffees with this machine, plan on doing some trial runs to get it right. Since you can adjust the amount of water and beans, you can make standard coffee if you want, but it’s not going to be as good as the espresso. Overall, we only recommend this to espresso drinkers, but it’s nice to know that you can make other beverages if and when you want a change.
The interface is also very clean and easy to use and given the fact that it also has a function for automatic cleaning, you don’t have to worry about cleaning the machine yourself. However, probably the most notable feature (among others) of the XS90 is the fact that it features a low noise design. What I mean by that is that the burr grinder is perfectly insulated and has the lowest noise grinding of any espresso machine on the market today.
The Achilles heel of any super automatic, brewing times are, in my opinion, far too short for proper extraction of the good stuff from ground coffee. Part of the problem is the puck diameter - 46ml in the Jura Capresso S9. The other problem (and I blame the Swiss for this and their gosh darn love for caffe suise), is that the grinder can't be dialed fine enough.
And that’s it. There’s very little in the way of cleaning or maintenance to be done, bar an occasional emptying of the drip tray, an occasional rinsing of the removable pod holder and, of course, the refilling of the water tank. The tank isn’t huge (0.8l), so you’ll need to do the latter fairly frequently. The drip tray, for its part, is adjustable – you can place it at one of three heights to suit the size of drinking vessel and reduce the chance of spillage.
The first machine I received never worked correctly. The milk would not steam and the espresso would start to come out and then stop. Upon stopping a message would display on the screen asking to press a button to fill the pump. This would occur 2-3 times before an expresso could actually be made. I experimented with several different grind settings, coffee strength, water temperatures, etc, but with no success. The machine continued to pump a few drops of espresso, asking to refill the pump, and waste the previous grinds. I literally wasted 2-3 cans of Illy espresso without ever getting espresso. In addition, with each espresso cycle, a large amount of water would precede any espresso. For example on a 1oz shot, about 0.1oz would be water that didn't run through the coffee.
There's one other area needing fixing, not only in these machines but in all super automatics I've ever tried - tiny puck sizes (diameter) = bad extraction. That's not me saying it. That's Dr. Illy and a wide range of scientific tests that the Illy labs have done finding the optimal puck size for superior extraction. At 46mm, these pucks are too tiny.
Jura elevates the bean to cup experience. Certain models, including the GIGA 5, Z9, J6, S9, E8 and ENA Micro 90 are equipped with One-Touch technology to brew the perfect cup cappuccino at the touch of a button. Newer models freature Jura's Pulse Extraction Process which improves the quality of your espresso. Several of the Swiss-made machines produce coffee and espresso to your exact specifications for strength, volume and temperature with flavor that is on par with the best cafes in the world—and it’s brewed with the touch of a button. Commercial Jura machines for the workplace are also available. With Jura machines ranging from $799 to $8,995, there is a model for every coffee lover. Call us today and let us help you find the perfect Jura coffee center for your needs.
3) This machine is crazy smart. It knows exactly when to clean itself, or tells you when to start the cleaning cycle. To clean it, all you do is insert a tablet in the coffee powder drawer and it does its thing. It knows when it needs water, when the filter needs to be changed, etc. In fact, since we have a water filter built into our refrigerator, we just use that filtered water in the coffee machine and therefore we don't need to use the expensive water filters. Bottom line, if you just pay attention and clean the machine on a regular basis when it tells you to, this is a no-brainer machine.
Last but not least, this machine features 5 level water hardness selectors and makes it a breeze to set it to your specific water hardness. On top of that, it can also count the number of coffee cups you’ve consumed, how many times the machine was cleaned, how often the steam function was used and so on. If you want, you can keep stats on a daily basis.
This super-automatic Jura Capresso ENA 5 coffee machine does produce a tasty cup of coffee, no doubt about it. But we are concerned about its ability to hold up under pressure (literally, with flying milk nozzles!). For the kind of cash that this machine requires, most customers would likely be happier with another Jura model (the S9, perhaps) or another brand of super-automatic coffee machine.