The first machine I received never worked correctly. The milk would not steam and the espresso would start to come out and then stop. Upon stopping a message would display on the screen asking to press a button to fill the pump. This would occur 2-3 times before an expresso could actually be made. I experimented with several different grind settings, coffee strength, water temperatures, etc, but with no success. The machine continued to pump a few drops of espresso, asking to refill the pump, and waste the previous grinds. I literally wasted 2-3 cans of Illy espresso without ever getting espresso. In addition, with each espresso cycle, a large amount of water would precede any espresso. For example on a 1oz shot, about 0.1oz would be water that didn't run through the coffee.
If you’re a froth fan, you won’t be disappointed – Jura machines tend to be very good frothers (if that’s a word) and manage to top off drinks to the same standard as you’ll usually find in the high street coffee shops. It’s certainly an impressive result, even if we found it was a novelty the wore off rather quickly. We’re not the biggest advocates of milk foaming though, so you might be more excited that we are!
Some machines can be quite slow to work their way through programmes, but Jura have put a lot of thought into minimising these delays. The water heating tends to be the cause of the waits, so the F8’s solution is to heat it as it passes through the internal pipes of the machine. The technical detail is a bit beyond us, but it seems to work well. If you want to know more and like the geeky detail, give ‘Jura Thermoblock’ a Google!
The Impressa Z6 employs Jura’s innovative Pulse Extraction Process brewing system. As opposed to a constant flow, water is instead pulsed through the grounds in short intervals that extract greater intensity and aroma while shortening the overall brew time. With P.E.P., espresso and ristretto can be prepared with greater clarity and flavor than ever before.
What a great price on this refurbished Jura Capresso Impressa F9. Our previous Jura Capresso lasted 10 years and made thousands of cups (sorry no counter on that model). I knew a refurbished model from this same maker would be a good bet. And sure enough it has proven to be just that. We have had it a month and have already made well over 250 cups with not one complaint. THANK YOU for making this product more affordable to the public with the refurbished price. During the economic recession we have been cutting cost when ever possible and I truly appreciate that this product was made available at such an exceptional price.
When ditching the K-cup and grinding the coffee yourself, you open yourself up to better, earthy-friendly options. Many single-serve coffee manufactures source their coffee from large plantations, and as a consumer you have very limited choice about where your coffee comes from and how it’s produced. When you grind your own with the Jura coffee machine, you are able to make more eco-conscious decisions about the coffee you purchase. We prefer to buy organic, single-origin roasts that have been certified by the rainforest alliance. We understand that this isn’t always possible, but when you are grinding your own coffee, there are more options available to you as a conscious consumer.
You don’t even have to deal with the coffee grounds right away: they just drop into a little box that needs periodic emptying. Like the the 1.4l water tank, this box slides out of the front of the machine, which means you don’t need to fumble around at the back or move it away from the wall every few cups of coffee you make. It’s a nice touch, especially as the water tank in particular requires regular topping up: every time you switch the machine on, it flushes water through its pipes to keep them clean. It’s a bit of a faff, but it has its benefits: the NC-ZA1 makes a surprisingly delicious cup of coffee.
4) The coffee and espresso are great. I've learned to make a latte just like Starbuck's and I haven't been back since. Some people complain that the frother doesn't work well, but here's the trick: first, you should use non-fat or low-fat milk. For some reason, lower fat milk froths better every time; second, be sure to clean the frothing nozzle after each use. Kind of a no-brainer, I know. Third, there are two settings on the frother, and you can change the setting by sliding the sleeve on the frothing tip up or down. Experiment with this and you will get the perfect froth, really.
To that end, the MT600 will attempt to keep track of when you last dropped in a fresh charcoal pack. Just press the "filter" button on the control panel, and after six weeks an associated green light will begin blinking. If you unplug the machine, however, all bets are off, as the clock and internal filter replacement timer lose track when power is lost.
Swiss-manufacturer Jura specializes in crafting high-end specialty coffee makers capable of competing with professional coffee shops. They are available in a wide range of pricing options, and if you’re in the market for one, there are some features to keep in mind. First, know what it actually brews. Jura machines are typically capable of making regular coffee, espresso, and other favorites, so be aware of what you are purchasing. Does it offer a high level of customization, and one-touch operation for those wishing to keep it simple? Is it easy to maintain and clean? Specialized features like adjustable coffee spouts and large-sized water reservoirs are also available.
Althought this is a refurbished machine, it looks and operates as a newly minted one. Watch the DVD which comes with it before you do anything and the set up and operations will be easy and foolproof, and I'll promise you a steaming perfect cup the 1st time. My wife loves this beauty. It was her Christmas gift. Works just like the company promises. The challenge now is to keep enough coffee beans in the kitchen. Jura-Capresso 13185 Impressa F7 Espresso Machine, Silver Metallic
3) This machine is crazy smart. It knows exactly when to clean itself, or tells you when to start the cleaning cycle. To clean it, all you do is insert a tablet in the coffee powder drawer and it does its thing. It knows when it needs water, when the filter needs to be changed, etc. In fact, since we have a water filter built into our refrigerator, we just use that filtered water in the coffee machine and therefore we don't need to use the expensive water filters. Bottom line, if you just pay attention and clean the machine on a regular basis when it tells you to, this is a no-brainer machine.